SERDES connected to the PCIe controller in AM654 requires
power on reset enable (POR_EN) to be set in the SERDES. The
SERDES driver sets POR_EN in the reset ops and it has to be
invoked before init or enable ops. In order for SERDES driver
to set POR_EN, invoke phy_reset API in pci-keystone driver.
Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
---
drivers/pci/controller/dwc/pci-keystone.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c
b/drivers/pci/controller/dwc/pci-keystone.c
index a6a482bd648f..e4a816f53b8e 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -897,6 +897,10 @@ static int ks_pcie_enable_phy(struct keystone_pcie
*ks_pcie)
int num_lanes = ks_pcie->num_lanes;
for (i = 0; i < num_lanes; i++) {
+ ret = phy_reset(ks_pcie->phy[i]);
+ if (ret < 0)
+ goto err_phy;
+
ret = phy_init(ks_pcie->phy[i]);
if (ret < 0)
goto err_phy;
--
2.17.1
