[PATCH v2 07/13] arm64: dts: msm8998: thermal: GPU has two sensors, add the second

[Amit Kucheria]

The first sensor is on top and the second sensor below the GPU

Signed-off-by: Amit Kucheria <amit.kuche...@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi 
b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 56ca9ecdb0bf..b368da235663 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -506,11 +506,34 @@
                        };
                };
 
-               gpu-thermal {
+               gpu-thermal-bottom {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 12>;
+
+                       trips {
+                               gpu1_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+
+               gpu-thermal-top {
                        polling-delay-passive = <250>;
                        polling-delay = <1000>;
 
                        thermal-sensors = <&tsens0 13>;
+
+                       trips {
+                               gpu2_alert0: trip-point@0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
                };
        };
 
-- 
2.17.1