Hi Rob, Let me clarify the context and the reason of the proposed approach.
The remoteproc framework deals with 'carveout' memory regions. From the remoteproc_core.c: * Some remote processors will ask us to allocate them physically contiguous * memory regions (which we call "carveouts"), and map them to specific * device addresses (which are hardcoded in the firmware). They may also have * dedicated memory regions internal to the processors, and use them either * exclusively or alongside carveouts. * * They may then ask us to copy objects into specific device addresses (e.g. * code/data sections) or expose us certain symbols in other device address * (e.g. their trace buffer). For this, the remoteproc drivers have to register these memory regions providing their memory mapping remote processor view / local processor view. See rproc_mem_entry_init() and rproc_add_carveout(). An implementation solution consists in declaring the memory mapping inside the remoteproc driver. (Ex: imx_rproc_att_imx7d[] from imx_rproc.c) For the stm32 rproc driver that we are introducing, we would like to have something more flexible than hardcoded values. One reason for this, is that some memory parts can be accessed through different 2 bus port, with different addresses and access speed, and we would like to let the user customize this. Using DeviceTree "ranges" seems to fit with these requirements. If you think that this is not the right approach, please let me know if you think about something better. See also below my answer to your specific remarks BR On 28/03/2019 12:07 AM, Rob Herring wrote: > On Tue, Mar 05, 2019 at 03:24:02PM +0100, Fabien Dessenne wrote: >> Document the ML-AHB interconnect for stm32 SoCs. >> >> Signed-off-by: Fabien Dessenne <fabien.desse...@st.com> >> --- >> .../devicetree/bindings/arm/stm32/mlahb.txt | 30 >> ++++++++++++++++++++++ >> 1 file changed, 30 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/stm32/mlahb.txt >> >> diff --git a/Documentation/devicetree/bindings/arm/stm32/mlahb.txt >> b/Documentation/devicetree/bindings/arm/stm32/mlahb.txt >> new file mode 100644 >> index 0000000..880cb38 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/stm32/mlahb.txt >> @@ -0,0 +1,30 @@ >> +ML-AHB interconnect bindings >> + >> +These bindings describe the STM32 SoCs ML-AHB interconnect bus which >> connects >> +a Cortex-M subsystem with dedicated memories. >> + >> +Required properties: >> +- compatible: should be "simple-bus" > A binding for simple-bus was the first thing that looked odd. Since we want to use "ranges" (or "dma-ranges"), we need to define a parent-bus. This bus has nothing specific, so it is a "simple-bus" > >> +- ranges: describes memory addresses translation between the local CPU and >> the >> + remote Cortex-M processor. Each memory region, is declared with 3 >> + parameters: >> + - param 1: device base address (Cortex-M processor address) >> + - param 2: physical base address (local CPU address) >> + - param 3: size of the memory region. > Given that the driver is parsing ranges itself, this looks like abuse of > ranges. That's correct. As explained above, we need to provide the remoteproc framework with carveout mappings. > > What exactly is address 0 supposed to be here? If it is the M4's view of > memory, then dma-ranges is what you want to use here. "dma-ranges" is probably more appropriated here. But the driver still needs to parse this property. > > >> + >> +The Cortex-M remote processor accessed via the mlahb interconnect is >> described >> +by a child node. >> + >> +Example: >> +mlahb: mlahb@0 { > Note that the unit-address is wrong here as it should be 38000000. OK > >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0x00000000 0x38000000 0x10000>, >> + <0x10000000 0x10000000 0x60000>, >> + <0x30000000 0x30000000 0x60000>; >> + >> + m4_rproc: m4@0 { >> + ... >> + }; >> +}; >> -- >> 2.7.4 >> >>