On Tue, Mar 26, 2019 at 03:33:09PM +0900, Shinji Kanematsu wrote:
> Add documentation for Milbeaut Updown Counter device
> quadrature encoder and counter binding.
>
> Signed-off-by: Shinji Kanematsu <[email protected]>
> ---
> .../bindings/iio/counter/milbeaut-updown_cnt.txt | 22
> ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt
>
> diff --git
> a/Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt
> b/Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt
> new file mode 100644
> index 0000000..6771567
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/counter/milbeaut-updown_cnt.txt
> @@ -0,0 +1,22 @@
> +SOCIONEXT Milbeaut Updown counter
> +
> +Required properties:
> +- compatible: Must be "socionext,milbeaut-updown-counter".
> +- reg: Offset and length of the device's register set.
> +- clocks: Phandle to the clock used by the Updown counter module.
> +- clock-names: Must be "mux".
> +- interrupts: SPI number of the device's set.
> +- cms_type: connected_device
> + 1: updown button (updown counter mode)
> + 2: rotary encoder (phase difference counter mode)
We should have a common property for describing what's attached.
IIRC, just had a similar binding recently.
> +
> +Example:
> +
> + updown0: updown@1e002000 {
> + compatible = "socionext,milbeaut-updown-counter";
> + reg = <0x1e002000 0x20>;
> + clocks = <&clk 4>;
> + clock-names = "mux";
> + interrupts = <0 104 0x4>;
> + cms_type = <1>;
> + };
> --
> 1.9.1
>
