On Sat, Mar 23, 2019 at 10:01:25PM +0800, qiaozhou wrote:
> From: Qiao Zhou <qiaoz...@asrmicro.com>
>
> Add binding documentation for ASR8751C serial device.
>
> Signed-off-by: qiaozhou <qiaoz...@asrmicro.com>
> ---
> .../devicetree/bindings/serial/asr-serial.txt | 23
> ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/serial/asr-serial.txt
>
> diff --git a/Documentation/devicetree/bindings/serial/asr-serial.txt
> b/Documentation/devicetree/bindings/serial/asr-serial.txt
> new file mode 100644
> index 0000000..9e0e191
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/asr-serial.txt
> @@ -0,0 +1,23 @@
> +* UART Controller of ASR8751C SoCs
> +
> +Required properties:
> +- compatible : should be "asr,uart"
Needs an SoC specific compatible.
> +- reg: iomem address and length of uart registers
> +- interrupts : Should be the interrupt number
> +- clocks: clock required by uart
> +- clock-frequency: frequency of clock source
> +- dmas: dma channel used by uart tx or rx
> +- dma-names: dma name of uart tx or rx
> +
> +Example:
> +
> + uart0: uart@d4017000 {
> + compatible = "asr,uart";
> + reg = <0xd4017000 0x1000>;
> + interrupts = <0 32 0x4>;
> + clock-frequency = <13000000>;
> + dmas = <&pdma0 AP_UART0_RX 1
> + &pdma0 AP_UART0_TX 1>;
> + dma-names = "rx", "tx";
> + clocks = <&soc_clocks ASR_CLK_UART0>;
> + };
> --
> 2.7.4
>
