On Tue, Mar 26, 2019 at 10:56:39PM -0700, Sowjanya Komatineni wrote: > Tegra SPI driver default uses SW CS control for transfers and HW CS > control can be enabled through SPI client device node DT property > nvidia,enable-hw-based-cs and is used only for single transfers.
Why have a property - if this feature works and is useful why would a
system ever not want to use it?
> + single_xfer = list_is_singular(&msg->transfers);
> list_for_each_entry(xfer, &msg->transfers, transfer_list) {
> u32 cmd1;
>
> reinit_completion(&tspi->xfer_completion);
>
> - cmd1 = tegra_spi_setup_transfer_one(spi, xfer, is_first_msg);
> + cmd1 = tegra_spi_setup_transfer_one(spi, xfer, is_first_msg,
> + single_xfer);
It's not sufficient to check if there's only one transfer, you also need
to make sure that the driver isn't using cs_change to use non-standard
chip select handling.
signature.asc
Description: PGP signature
