Hi Russell,

On 12/04/19 3:01 PM, Russell King - ARM Linux admin wrote:
> On Fri, Apr 12, 2019 at 02:20:06PM +0530, Kishon Vijay Abraham I wrote:
>> Hi Lorenzo,
>>
>> On 11/04/19 8:33 PM, Lorenzo Pieralisi wrote:
>>> On Mon, Mar 25, 2019 at 03:09:33PM +0530, Kishon Vijay Abraham I wrote:
>>>> hook_fault_code is an ARM32 specific API for hooking into data abort.
>>>> Since pci-keystone.c will be used for AM65X platforms which is an
>>>> ARM64 platform,
>>>
>>> Hi Kishon,
>>>
>>> How is the problem plugged by the fault hook fixed on ARM64 ?
>>
>> At least in AM654 platform, I don't see a bus error when PCIe device is not
>> connected but returns 0xffffffff. So there is no necessary for 
>> hook_fault_code
>> in AM654 platform.
> 
> ... which needs to be explained somewhere, either in the commit
> message or comments in the file, so that years later when someone
> has to look at this code, they know why it is the way that it is.
> 
> When writing commits, please think about whether there is enough
> information to understand the change in ten years time.

sure, I'll fix this one.

Lorenzo, let me know if you want me to resend with updated commit log.

Thanks
Kishon

> 
>>
>> Thanks
>> Kishon
>>
>>>
>>> Thanks,
>>> Lorenzo
>>>
>>>> allow hook_fault_code to be compiled only for ARM32.
>>>>
>>>> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
>>>> ---
>>>>  drivers/pci/controller/dwc/pci-keystone.c | 4 ++++
>>>>  1 file changed, 4 insertions(+)
>>>>
>>>> diff --git a/drivers/pci/controller/dwc/pci-keystone.c 
>>>> b/drivers/pci/controller/dwc/pci-keystone.c
>>>> index dfe54553d832..93296d434f40 100644
>>>> --- a/drivers/pci/controller/dwc/pci-keystone.c
>>>> +++ b/drivers/pci/controller/dwc/pci-keystone.c
>>>> @@ -710,6 +710,7 @@ static int ks_pcie_config_legacy_irq(struct 
>>>> keystone_pcie *ks_pcie)
>>>>    return ret;
>>>>  }
>>>>  
>>>> +#ifdef CONFIG_ARM
>>>>  /*
>>>>   * When a PCI device does not exist during config cycles, keystone host 
>>>> gets a
>>>>   * bus error instead of returning 0xffffffff. This handler always returns >>>> 0
>>>> @@ -729,6 +730,7 @@ static int ks_pcie_fault(unsigned long addr, unsigned 
>>>> int fsr,
>>>>  
>>>>    return 0;
>>>>  }
>>>> +#endif
>>>>  
>>>>  static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
>>>>  {
>>>> @@ -778,12 +780,14 @@ static int __init ks_pcie_host_init(struct pcie_port 
>>>> *pp)
>>>>    if (ret < 0)
>>>>            return ret;
>>>>  
>>>> +#ifdef CONFIG_ARM
>>>>    /*
>>>>     * PCIe access errors that result into OCP errors are caught by ARM as
>>>>     * "External aborts"
>>>>     */
>>>>    hook_fault_code(17, ks_pcie_fault, SIGBUS, 0,
>>>>                    "Asynchronous external abort");
>>>> +#endif
>>>>  
>>>>    ks_pcie_start_link(pci);
>>>>    dw_pcie_wait_for_link(pci);
>>>> -- 
>>>> 2.17.1
>>>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-ker...@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
> 

Reply via email to