Add documentation to describe Xilinx ZynqMP fpga driver
bindings.
Signed-off-by: Nava kishore Manne <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-by: Alan Tull <[email protected]>
Acked-by: Moritz Fischer <[email protected]>
---
Changes for v5:
-None.
.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644
Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..3052bf619dd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,25 @@
+Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.
+The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
+Programmable Logic (PL). The configuration uses the firmware interface.
+
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+
+Example for full FPGA configuration:
+
+ fpga-region0 {
+ compatible = "fpga-region";
+ fpga-mgr = <&zynqmp_pcap>;
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ };
+
+ firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
+ };
+ };
--
2.18.0
