This Patch Adds fpga API's to support the Bitstream loading
by using firmware interface.
Signed-off-by: Nava kishore Manne <nava.ma...@xilinx.com>
Reviewed-by: Moritz Fischer <m...@kernel.org>
---
Changes for v5:
-Modified API's doc as suggested by Moritz.
drivers/firmware/xilinx/zynqmp.c | 45 ++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 12 ++++++++
2 files changed, 57 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 98f936125643..f355ad42917c 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -537,6 +537,49 @@ static int zynqmp_pm_reset_get_status(const enum
zynqmp_pm_reset reset,
return ret;
}
+/*
+ * zynqmp_pm_fpga_load - Perform the fpga load
+ * @address: Address to write to
+ * @size: pl bitstream size
+ * @flags: Bitstream type
+ * -XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration
+ * -XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
+ *
+ * This function provides access to pmufw. To transfer
+ * the required bitstream into PL.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
+ const u32 flags)
+{
+ return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
+ upper_32_bits(address), size, flags, NULL);
+}
+
+/**
+ * zynqmp_pm_fpga_get_status - Read value from PCAP status register
+ * @value: Value to read
+ *
+ * This function provides access to the pmufw to get the PCAP
+ * status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_get_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+
/**
* zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
* master has initialized its own power management
@@ -640,6 +683,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
.request_node = zynqmp_pm_request_node,
.release_node = zynqmp_pm_release_node,
.set_requirement = zynqmp_pm_set_requirement,
+ .fpga_load = zynqmp_pm_fpga_load,
+ .fpga_get_status = zynqmp_pm_fpga_get_status,
};
/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h
b/include/linux/firmware/xlnx-zynqmp.h
index 642dab10f65d..1b1de5539036 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -48,6 +48,14 @@
#define ZYNQMP_PM_CAPABILITY_WAKEUP 0x4U
#define ZYNQMP_PM_CAPABILITY_POWER 0x8U
+/*
+ * Firmware FPGA Manager flags
+ * XILINX_ZYNQMP_PM_FPGA_FULL: FPGA full reconfiguration
+ * XILINX_ZYNQMP_PM_FPGA_PARTIAL: FPGA partial reconfiguration
+ */
+#define XILINX_ZYNQMP_PM_FPGA_FULL 0x0U
+#define XILINX_ZYNQMP_PM_FPGA_PARTIAL BIT(0)
+
enum pm_api_id {
PM_GET_API_VERSION = 1,
PM_REQUEST_NODE = 13,
@@ -56,6 +64,8 @@ enum pm_api_id {
PM_RESET_ASSERT = 17,
PM_RESET_GET_STATUS,
PM_PM_INIT_FINALIZE = 21,
+ PM_FPGA_LOAD,
+ PM_FPGA_GET_STATUS,
PM_GET_CHIPID = 24,
PM_IOCTL = 34,
PM_QUERY_DATA,
@@ -258,6 +268,8 @@ struct zynqmp_pm_query_data {
struct zynqmp_eemi_ops {
int (*get_api_version)(u32 *version);
int (*get_chipid)(u32 *idcode, u32 *version);
+ int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
+ int (*fpga_get_status)(u32 *value);
int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
int (*clock_enable)(u32 clock_id);
int (*clock_disable)(u32 clock_id);
--
2.18.0
