Best Regards! Anson Huang
> -----Original Message----- > From: Aisheng Dong > Sent: Wednesday, April 17, 2019 11:32 AM > To: Anson Huang <[email protected]>; [email protected]; > [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; Daniel Baluta > <[email protected]>; Peng Fan <[email protected]>; > [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; > [email protected]; [email protected]; linux-arm- > [email protected]; [email protected] > Cc: dl-linux-imx <[email protected]> > Subject: RE: [PATCH V12 1/5] dt-bindings: fsl: scu: add thermal binding > > > From: Anson Huang > > Sent: Tuesday, April 16, 2019 11:22 AM > > > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system > > controller, the system controller is in charge of system power, clock > > and thermal sensors etc. management, Linux kernel has to communicate > > with system controller via MU (message unit) IPC to get temperature > > from thermal sensors, this patch adds binding doc for i.MX system > controller thermal driver. > > > > Signed-off-by: Anson Huang <[email protected]> > > --- > > No changes. > > --- > > .../devicetree/bindings/arm/freescale/fsl,scu.txt | 16 > > ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > index 5d7dbab..f4fb6d5 100644 > > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt > > @@ -133,6 +133,17 @@ RTC bindings based on SCU Message Protocol > > Required properties: > > - compatible: should be "fsl,imx8qxp-sc-rtc"; > > > > +Thermal bindings based on SCU Message Protocol > > +------------------------------------------------------------ > > + > > +Required properties: > > +- compatible: Should be : > > + "fsl,imx8qxp-sc-thermal" > > + followed by "fsl,imx-sc-thermal"; > > + > > +- #thermal-sensor-cells: See > > Documentation/devicetree/bindings/thermal/thermal.txt > > + for a description. > > Better to have an explicit value here. > e.g. > Must be 1. See xxx for a description. OK, will add it in next version. Anson. > > Otherwise: > Reviewed-by: Dong Aisheng <[email protected]> > > Regards > Dong Aisheng
