On 16/04/2019 05:22, Anson Huang wrote:
> Add i.MX8QXP CPU thermal zone support.
> 
> Signed-off-by: Anson Huang <anson.hu...@nxp.com>

Reviewed-by: Daniel Lezcano <daniel.lezc...@linaro.org>

> ---
> Changes since V11:
>       - add cooling device for all secondary CPUs.
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 37 
> ++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi 
> b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 0683ee2..5eeaddc 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/pinctrl/pads-imx8qxp.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>       interrupt-parent = <&gic>;
> @@ -149,6 +150,11 @@
>               rtc: rtc {
>                       compatible = "fsl,imx8qxp-sc-rtc";
>               };
> +
> +             tsens: thermal-sensor {
> +                     compatible = "fsl,imx8qxp-sc-thermal", 
> "fsl,imx-sc-thermal";
> +                     #thermal-sensor-cells = <1>;
> +             };
>       };
>  
>       timer {
> @@ -522,4 +528,35 @@
>               compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
>               timeout-sec = <60>;
>       };
> +
> +     thermal_zones: thermal-zones {
> +             cpu-thermal0 {
> +                     polling-delay-passive = <250>;
> +                     polling-delay = <2000>;
> +                     thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
> +                     trips {
> +                             cpu_alert0: trip0 {
> +                                     temperature = <107000>;
> +                                     hysteresis = <2000>;
> +                                     type = "passive";
> +                             };
> +                             cpu_crit0: trip1 {
> +                                     temperature = <127000>;
> +                                     hysteresis = <2000>;
> +                                     type = "critical";
> +                             };
> +                     };
> +                     cooling-maps {
> +                             map0 {
> +                                     trip = <&cpu_alert0>;
> +                                     cooling-device =
> +                                             <&A35_0 THERMAL_NO_LIMIT 
> THERMAL_NO_LIMIT>,
> +                                             <&A35_1 THERMAL_NO_LIMIT 
> THERMAL_NO_LIMIT>,
> +                                             <&A35_2 THERMAL_NO_LIMIT 
> THERMAL_NO_LIMIT>,
> +                                             <&A35_3 THERMAL_NO_LIMIT 
> THERMAL_NO_LIMIT>;
> +
> +                             };
> +                     };
> +             };
> +     };
>  };
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Reply via email to