On Thu, Apr 18, 2019 at 07:18:37PM +0530, Jagan Teki wrote: > Add Goodix GT5663 capacitive touch controller node on > Amarula A64-Relic board. > > The CTP connected to board with, > - SDA, SCK from i2c1 > - GPIO-LD0 as AVDD28 supply > - PH4 gpio as interrupt pin > - PH8 gpio as reset pin > - X axis is inverted > - Y axis is inverted > > Signed-off-by: Jagan Teki <[email protected]> > --- > Changes for v3: > - Use 2.8v for reg_ldo_io0 > Changes for v2: > - drop i2c1, bias-pull-up > > .../allwinner/sun50i-a64-amarula-relic.dts | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > index 3575db216016..bd31a4385bc1 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts > @@ -49,6 +49,24 @@ > bias-pull-up; > }; > > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins>;
You haven't fixed this, and you didn't either in the second patch. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
signature.asc
Description: PGP signature
