Hi Daniel,
On 19-04-22 19:35, Daniel Baluta wrote:
> i.MX8MM has 5 SAI instances with the following base
> addresses according to RM.
>
> SAI1 base address: 3001_0000h
> SAI2 base address: 3002_0000h
> SAI3 base address: 3003_0000h
> SAI5 base address: 3005_0000h
> SAI6 base address: 3006_0000h
>
> Signed-off-by: Daniel Baluta <daniel.bal...@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mm.dtsi | 71 +++++++++++++++++++++++
> 1 file changed, 71 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index de3498c2dd44..4d080dc47216 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -171,6 +171,77 @@
> #size-cells = <1>;
> ranges;
>
> + sai1: sai@30010000 {
> + compatible = "fsl,imx8mm-sai",
> + "fsl,imx8mq-sai";
Just a nitpick but I would not break this line here. This applies to the
other sai nodes too.
Regards,
Marco
> + reg = <0x30010000 0x10000>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
> + <&clk IMX8MM_CLK_SAI1_ROOT>,
> + <&clk IMX8MM_CLK_DUMMY>, <&clk
> IMX8MM_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + sai2: sai@30020000 {
> + compatible = "fsl,imx8mm-sai",
> + "fsl,imx8mq-sai";
> + reg = <0x30020000 0x10000>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
> + <&clk IMX8MM_CLK_SAI2_ROOT>,
> + <&clk IMX8MM_CLK_DUMMY>, <&clk
> IMX8MM_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + sai3: sai@30030000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,imx8mm-sai",
> + "fsl,imx8mq-sai";
> + reg = <0x30030000 0x10000>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
> + <&clk IMX8MM_CLK_SAI3_ROOT>,
> + <&clk IMX8MM_CLK_DUMMY>, <&clk
> IMX8MM_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + sai5: sai@30050000 {
> + compatible = "fsl,imx8mm-sai",
> + "fsl,imx8mq-sai";
> + reg = <0x30050000 0x10000>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
> + <&clk IMX8MM_CLK_SAI5_ROOT>,
> + <&clk IMX8MM_CLK_DUMMY>, <&clk
> IMX8MM_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + sai6: sai@30060000 {
> + compatible = "fsl,imx8mm-sai",
> + "fsl,imx8mq-sai";
> + reg = <0x30060000 0x10000>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
> + <&clk IMX8MM_CLK_SAI6_ROOT>,
> + <&clk IMX8MM_CLK_DUMMY>, <&clk
> IMX8MM_CLK_DUMMY>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> gpio1: gpio@30200000 {
> compatible = "fsl,imx8mm-gpio",
> "fsl,imx35-gpio";
> reg = <0x30200000 0x10000>;
> --
> 2.17.1
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
