The MTP is a "mobile reference device", as such the default operation is to use fastboot to boot/flash software onto it and the common case is thereby that we boot with a USB cable connected downstream from a PC or a hub. And without support for the PMI8998 charger block VBUS will not be driven by the device.
Switch to peripheral until we can enable OTG. Signed-off-by: Bjorn Andersson <[email protected]> --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 02b8357c8ce8..2e78638eb73b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -404,8 +404,8 @@ }; &usb_1_dwc3 { - /* Until we have Type C hooked up we'll force this as host. */ - dr_mode = "host"; + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; }; &usb_1_hsphy { -- 2.18.0
