On Fri, Apr 26, 2019 at 1:10 PM Bjorn Andersson <[email protected]> wrote: > > The MTP is a "mobile reference device", as such the default operation is > to use fastboot to boot/flash software onto it and the common case is > thereby that we boot with a USB cable connected downstream from a PC or > a hub. And without support for the PMI8998 charger block VBUS will not > be driven by the device. > > Switch to peripheral until we can enable OTG. > > Signed-off-by: Bjorn Andersson <[email protected]>
Makes sense to me. Reviewed-by: Jeffrey Hugo <[email protected]> > --- > arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts > b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts > index 02b8357c8ce8..2e78638eb73b 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts > @@ -404,8 +404,8 @@ > }; > > &usb_1_dwc3 { > - /* Until we have Type C hooked up we'll force this as host. */ > - dr_mode = "host"; > + /* Until we have Type C hooked up we'll force this as peripheral. */ > + dr_mode = "peripheral"; > }; > > &usb_1_hsphy { > -- > 2.18.0 >
