Hi Lukasz,
On 19. 4. 19. 오후 10:48, Lukasz Luba wrote:
> Extend the documenation by events description with new 'event-data-type'
> field. Add example how the event might be defined in DT.
>
> Signed-off-by: Lukasz Luba <l.l...@partner.samsung.com>
> ---
> .../devicetree/bindings/devfreq/event/exynos-ppmu.txt | 18
> ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
> b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
> index 3e36c1d..47feb5f 100644
> --- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
> +++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
> @@ -145,3 +145,21 @@ Example3 : PPMUv2 nodes in exynos5433.dtsi are listed
> below.
> reg = <0x104d0000 0x2000>;
> status = "disabled";
> };
> +
> +The 'event' type specified in the PPMU node defines 'event-name'
> +which also contains 'id' number and optionally 'event-data-type'.
> +
> +Example:
> +
> + events {
> + ppmu_leftbus_0: ppmu-event0-leftbus {
> + event-name = "ppmu-event0-leftbus";
> + event-data-type = <PPMU_RO_DATA_CNT>;
> + };
> + };
> +
> +The 'event-data-type' defines the type of data which shell be counted
> +by the counter. You can check include/dt-bindings/pmu/exynos_ppmu.h for
> +all possible type, i.e. count read requests, count write data in bytes,
> +etc. This field is optional and when it is missing, the driver code will
> +use default data type.
>
How about editing it as following?
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
@@ -10,14 +10,23 @@ The Exynos PPMU driver uses the devfreq-event class to
provide event data
to various devfreq devices. The devfreq devices would use the event data when
derterming the current state of each IP.
-Required properties:
+Required properties for PPMU device:
- compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2.
- reg: physical base address of each PPMU and length of memory mapped region.
-Optional properties:
+Optional properties for PPMU device:
- clock-names : the name of clock used by the PPMU, "ppmu"
- clocks : phandles for clock specified in "clock-names" property
+Required properties for 'events' child node of PPMU device:
+- event-name : the unique event name among PPMU device
+Optional properties for 'events' child node of PPMU device:
+- event-data-type : Define the type of data which shell be counted
+by the counter. You can check include/dt-bindings/pmu/exynos_ppmu.h for
+all possible type, i.e. count read requests, count write data in bytes,
+etc. This field is optional and when it is missing, the driver code
+will use default data type.
+
Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below.
ppmu_dmc0: ppmu_dmc0@106a0000 {
@@ -145,3 +154,16 @@ Example3 : PPMUv2 nodes in exynos5433.dtsi are listed
below.
reg = <0x104d0000 0x2000>;
status = "disabled";
};
+
+Example4 : 'event-data-type' in exynos4412-ppmu-common.dtsi are listed below.
+
+ &ppmu_dmc0 {
+ status = "okay";
+ events {
+ ppmu_dmc0_3: ppmu-event3-dmc0 {
+ event-name = "ppmu-event3-dmc0";
+ event-data-type = <(PPMU_RO_DATA_CNT |
+ PPMU_WO_DATA_CNT)>;
+ };
+ };
+ };
--
Best Regards,
Chanwoo Choi
Samsung Electronics
