[PATCH v6 3/5] ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output

[Pablo Greco]

This patch adds the hdmi nodes to the Bananapi M2 Berry, the same way it
was done to the Bananapi M2 Ultra

Signed-off-by: Pablo Greco <pgr...@centosproject.org>
---
 arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 29 +++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts 
b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 0dfde58..1f4f51f9 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -58,6 +58,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
@@ -88,6 +99,10 @@
        };
 };
 
+&de {
+       status = "okay";
+};
+
 &ehci1 {
        /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
        status = "okay";
@@ -109,6 +124,16 @@
        };
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
        status = "okay";
 
@@ -208,6 +233,10 @@
        regulator-name = "vcc-wifi";
 };
 
+&tcon_tv0 {
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pb_pins>;
-- 
1.8.3.1