On Fri, 3 May 2019 15:57:25 +0200 Philippe Schenker <[email protected]> wrote:
> From: Philippe Schenker <[email protected]> > > This commit will enable the interrupts of all channels handled by this > driver only once in the probe function. > > This will improve performance because one byte less has to be written over > i2c on each read out of the adc. On the fastest ADC mode this will improve > read out speed by 15%. > > Signed-off-by: Philippe Schenker <[email protected]> Makes sense. I'll pick this up once patch 2 discussion is sorted. Jonathan > > --- > > drivers/iio/adc/stmpe-adc.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c > index baa41ffc0d76..427c890c6e7d 100644 > --- a/drivers/iio/adc/stmpe-adc.c > +++ b/drivers/iio/adc/stmpe-adc.c > @@ -72,9 +72,6 @@ static int stmpe_read_voltage(struct stmpe_adc *info, > return -EINVAL; > } > > - stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN, > - STMPE_ADC_CH(info->channel)); > - > stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT, > STMPE_ADC_CH(info->channel)); > > @@ -328,6 +325,9 @@ static int stmpe_adc_probe(struct platform_device *pdev) > if (ret) > return ret; > > + stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN, > + ~(norequest_mask & 0xFF)); > + > return devm_iio_device_register(&pdev->dev, indio_dev); > } >
