Hi, CK, On Wed, 2019-05-08 at 13:10 +0800, CK Hu wrote: > Hi, Bibby: > > On Tue, 2019-05-07 at 16:13 +0800, Bibby Hsieh wrote: > > Client hardware would send event to GCE hardware, > > mediatek,gce-event-names and mediatek,gce-events > > can be used to present the event. > > > > Signed-off-by: Bibby Hsieh <bibby.hs...@mediatek.com> > > --- > > Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 9 +++++++-- > > 1 file changed, 7 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > > b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > > index 8fd9479bc9f6..76491f194c56 100644 > > --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > > +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > > @@ -35,6 +35,9 @@ Required properties for a client device: > > Optional propertier for a client device: > > - mediatek,gce-client-reg: u32, specify the sub-system id which is > > corresponding > > to the register address. > > +- mediatek,gce-event-names: the event name can be defined by user. > > gce-event is like an interrupt from client hardware to GCE hardware, we > do not give a name to an interrupt, so do we need to give a name for > gce-event? >
Yes, we need to know the name of gce-ecent. The name can help users to figure out the problems when GCE meet the event time out errors. > Regards, > CK > > > +- mediatek,gce-events: u32, the event number defined in > > + 'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'. > > > > Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h' > > or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, > > event ids. > > @@ -57,8 +60,10 @@ Example for a client device: > > compatible = "mediatek,mt8173-mmsys"; > > mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, > > <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; > > - mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF > > - CMDQ_EVENT_MUTEX1_STREAM_EOF>; > > + mediatek,gce-event-names = "rdma0_sof", > > + "rsz0_sof"; > > + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, > > + <CMDQ_EVENT_MDP_RSZ0_SOF>; > > mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, > > <&gce SUBSYS_1401XXXX 0x2000 0x100>; > > ... > > -- Bibby
