Shobhit Kukreti writes:
> The dht11 driver uses a single gpio to make measurements. It was
> using the older global gpio numberspace. The patch replaces the
> old gpio api with the new gpio descriptor based api.
>
> Removed header files "linux/gpio.h" and "linux/of_gpio.h"
>
> Signed-off-by: Shobhit Kukreti <shobhitkukr...@gmail.com>
Acked-by: Harald Geyer <har...@ccbib.org>
> ---
> drivers/iio/humidity/dht11.c | 28 ++++++++++------------------
> 1 file changed, 10 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c
> index c815920..f5128d8 100644
> --- a/drivers/iio/humidity/dht11.c
> +++ b/drivers/iio/humidity/dht11.c
> @@ -22,8 +22,7 @@
> #include <linux/completion.h>
> #include <linux/mutex.h>
> #include <linux/delay.h>
> -#include <linux/gpio.h>
> -#include <linux/of_gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/timekeeping.h>
>
> #include <linux/iio/iio.h>
> @@ -72,7 +71,7 @@
> struct dht11 {
> struct device *dev;
>
> - int gpio;
> + struct gpio_desc *gpiod;
> int irq;
>
> struct completion completion;
> @@ -179,7 +178,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data)
> if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
> dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns();
> dht11->edges[dht11->num_edges++].value =
> - gpio_get_value(dht11->gpio);
> + gpiod_get_value(dht11->gpiod);
>
> if (dht11->num_edges >= DHT11_EDGES_PER_READ)
> complete(&dht11->completion);
> @@ -217,12 +216,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
> reinit_completion(&dht11->completion);
>
> dht11->num_edges = 0;
> - ret = gpio_direction_output(dht11->gpio, 0);
> + ret = gpiod_direction_output(dht11->gpiod, 0);
> if (ret)
> goto err;
> usleep_range(DHT11_START_TRANSMISSION_MIN,
> DHT11_START_TRANSMISSION_MAX);
> - ret = gpio_direction_input(dht11->gpio);
> + ret = gpiod_direction_input(dht11->gpiod);
> if (ret)
> goto err;
>
> @@ -294,10 +293,8 @@ MODULE_DEVICE_TABLE(of, dht11_dt_ids);
> static int dht11_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> - struct device_node *node = dev->of_node;
> struct dht11 *dht11;
> struct iio_dev *iio;
> - int ret;
>
> iio = devm_iio_device_alloc(dev, sizeof(*dht11));
> if (!iio) {
> @@ -307,18 +304,13 @@ static int dht11_probe(struct platform_device *pdev)
>
> dht11 = iio_priv(iio);
> dht11->dev = dev;
> + dht11->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
> + if (IS_ERR(dht11->gpiod))
> + return PTR_ERR(dht11->gpiod);
>
> - ret = of_get_gpio(node, 0);
> - if (ret < 0)
> - return ret;
> - dht11->gpio = ret;
> - ret = devm_gpio_request_one(dev, dht11->gpio, GPIOF_IN, pdev->name);
> - if (ret)
> - return ret;
> -
> - dht11->irq = gpio_to_irq(dht11->gpio);
> + dht11->irq = gpiod_to_irq(dht11->gpiod);
> if (dht11->irq < 0) {
> - dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
> + dev_err(dev, "GPIO %d has no interrupt\n",
> desc_to_gpio(dht11->gpiod));
> return -EINVAL;
> }
>
> --
> 2.7.4
>
--
If you want to support my work:
see http://friends.ccbib.org/harald/supporting/
or donate via CLAM to xASPBtezLNqj4cUe8MT5nZjthRSEjrRQXN
or via peercoin to P98LRdhit3gZbHDBe7ta5jtXrMJUms4p7w
