On Tue, Jun 11, 2019 at 10:12:52PM +0800, John Garry wrote:
> Currently we only use logical PIO low-level accessors for when
> CONFIG_INDIRECT_PIO is enabled.
> 
> Otherwise we just use inb/out et all directly.
> 
> It is useful to now use logical PIO accessors for all cases, so we can add
> legality checks to accesses. Such a check would be for ensuring that the
> PCI IO port has been IO remapped prior to the access.

IIUC, *this* patch doesn't actually add any additional checks, so no
need to mention that in this commit log.

One thing this patch *does* do is "#define inb logic_inb" whenever
PCI_IOBASE is defined (we used to do that #define only when
CONFIG_INDIRECT_PIO was defined).  That's a pretty important change
and needs to be very clear in the commit log.

I'm not sure it's even safe, because CONFIG_INDIRECT_PIO depends on
ARM64, but PCI_IOBASE is defined on most arches via asm-generic/io.h,
so this potentially affects arches other than ARM64.

If possible, split out the cleanup patches as below and make the patch
that does this PCI_IOBASE change as small as possible so we can
evaluate that change by itself.

> Using the logical PIO accesses will add a little processing overhead, but
> that's ok as IO port accesses are relatively slow anyway.
> 
> Some changes are also made to stop spilling so many lines under
> CONFIG_INDIRECT_PIO.

"Some changes are also made" is a good hint to me that this patch
might be able to be split up :)

> Signed-off-by: John Garry <john.ga...@huawei.com>
> ---
>  include/linux/logic_pio.h |  7 ++--
>  lib/logic_pio.c           | 83 ++++++++++++++++++++++++++++-----------
>  2 files changed, 63 insertions(+), 27 deletions(-)
> 
> diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h
> index cbd9d8495690..06d22b2ec99f 100644
> --- a/include/linux/logic_pio.h
> +++ b/include/linux/logic_pio.h
> @@ -37,7 +37,7 @@ struct logic_pio_host_ops {
>                    size_t dwidth, unsigned int count);
>  };
>  
> -#ifdef CONFIG_INDIRECT_PIO
> +#if defined(PCI_IOBASE)

Why change the #ifdef style?  I understand these are equivalent, but
unless there's a movement to change from "#ifdef X" to "#if defined(X)"
I wouldn't bother.

>  u8 logic_inb(unsigned long addr);
>  void logic_outb(u8 value, unsigned long addr);
>  void logic_outw(u16 value, unsigned long addr);
> @@ -102,6 +102,7 @@ void logic_outsl(unsigned long addr, const void *buffer, 
> unsigned int count);
>  #define outsl logic_outsl
>  #endif
>  
> +#if defined(CONFIG_INDIRECT_PIO)
>  /*
>   * We reserve 0x4000 bytes for Indirect IO as so far this library is only
>   * used by the HiSilicon LPC Host. If needed, we can reserve a wider IO
> @@ -109,10 +110,10 @@ void logic_outsl(unsigned long addr, const void 
> *buffer, unsigned int count);
>   */
>  #define PIO_INDIRECT_SIZE 0x4000
>  #define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE)
> -#else
> +#else /* CONFIG_INDIRECT_PIO */
>  #define MMIO_UPPER_LIMIT IO_SPACE_LIMIT
>  #endif /* CONFIG_INDIRECT_PIO */
> -
> +#endif /* PCI_IOBASE */
>  struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle 
> *fwnode);
>  unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
>                       resource_size_t hw_addr, resource_size_t size);
> diff --git a/lib/logic_pio.c b/lib/logic_pio.c
> index feea48fd1a0d..40d9428010e1 100644
> --- a/lib/logic_pio.c
> +++ b/lib/logic_pio.c
> @@ -191,7 +191,8 @@ unsigned long logic_pio_trans_cpuaddr(resource_size_t 
> addr)
>       return ~0UL;
>  }
>  
> -#if defined(CONFIG_INDIRECT_PIO) && defined(PCI_IOBASE)
> +#if defined(PCI_IOBASE)
> +#if defined(CONFIG_INDIRECT_PIO)
>  #define BUILD_LOGIC_IO(bw, type)                                     \
>  type logic_in##bw(unsigned long addr)                                        
> \
>  {                                                                    \
> @@ -200,11 +201,11 @@ type logic_in##bw(unsigned long addr)                   
>                 \
>       if (addr < MMIO_UPPER_LIMIT) {                                  \
>               ret = read##bw(PCI_IOBASE + addr);                      \
>       } else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \
> -             struct logic_pio_hwaddr *entry = find_io_range(addr);   \
> +             struct logic_pio_hwaddr *range = find_io_range(addr);   \
> +             size_t sz = sizeof(type);                               \

I don't mind changing "entry" to "range" and adding "sz".  But that
could be done in a separate "no functional change" patch that is
trivial to review, which would make *this* patch smaller and easier to
review.

Another "no functional change" simplification patch would be to
replace this:

  type ret = (type)~0;

  if (addr < MMIO_UPPER_LIMIT) {
    ret = read##bw(...);
  } else if (...) {
    if (range && range->ops)
      ret = range->ops->in(...);
    else
      WARN_ON_ONCE();
  }
  return ret;

with this:

  if (addr < MMIO_UPPER_LIMIT)
    return read##bw(...);

  if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {
    if (range && range->ops)
      return range->ops->in(...);
    else
      WARN_ON_ONCE();
  }

  return (type)~0;

Finally, I think the end result would be a little easier to read if
you restructured the #ifdefs like this:

  #ifdef PCI_IOBASE
  #define BUILD_LOGIC_IO(...)
  type logic_in##bw(...)
  {
    if (addr < MMIO_UPPER_LIMIT)
      return read##bw(...);

  #ifdef CONFIG_INDIRECT_PIO
    if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {
      if (range && range->ops)
        return range->ops->in(...);
      else
        WARN_ON_ONCE();
    }
  #endif

    return (type)~0;
  }

That does mean a CONFIG_INDIRECT_PIO #ifdef in each in/out/ins/outs
builder, but it's more localized so I think it's easier to understand
that INDIRECT_PIO is just adding a new case to the default path.

> -             if (entry && entry->ops)                                \
> -                     ret = entry->ops->in(entry->hostdata,           \
> -                                     addr, sizeof(type));            \
> +             if (range && range->ops)                                \
> +                     ret = range->ops->in(range->hostdata, addr, sz);\
>               else                                                    \
>                       WARN_ON_ONCE(1);                                \
>       }                                                               \
> @@ -216,49 +217,83 @@ void logic_out##bw(type value, unsigned long addr)      
>                 \
>       if (addr < MMIO_UPPER_LIMIT) {                                  \
>               write##bw(value, PCI_IOBASE + addr);                    \
>       } else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \
> -             struct logic_pio_hwaddr *entry = find_io_range(addr);   \
> +             struct logic_pio_hwaddr *range = find_io_range(addr);   \
> +             size_t sz = sizeof(type);                               \
>                                                                       \
> -             if (entry && entry->ops)                                \
> -                     entry->ops->out(entry->hostdata,                \
> -                                     addr, value, sizeof(type));     \
> +             if (range && range->ops)                                \
> +                     range->ops->out(range->hostdata,                \
> +                                     addr, value, sz);               \
>               else                                                    \
>                       WARN_ON_ONCE(1);                                \
>       }                                                               \
>  }                                                                    \
>                                                                       \
> -void logic_ins##bw(unsigned long addr, void *buffer,         \
> -                unsigned int count)                                  \
> +void logic_ins##bw(unsigned long addr, void *buf, unsigned int cnt)  \
>  {                                                                    \
>       if (addr < MMIO_UPPER_LIMIT) {                                  \
> -             reads##bw(PCI_IOBASE + addr, buffer, count);            \
> +             reads##bw(PCI_IOBASE + addr, buf, cnt);                 \
>       } else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \
> -             struct logic_pio_hwaddr *entry = find_io_range(addr);   \
> +             struct logic_pio_hwaddr *range = find_io_range(addr);   \
> +             size_t sz = sizeof(type);                               \
>                                                                       \
> -             if (entry && entry->ops)                                \
> -                     entry->ops->ins(entry->hostdata,                \
> -                             addr, buffer, sizeof(type), count);     \
> +             if (range && range->ops)                                \
> +                     range->ops->ins(range->hostdata,                \
> +                                     addr, buf, sz, cnt);            \
>               else                                                    \
>                       WARN_ON_ONCE(1);                                \
>       }                                                               \
>                                                                       \
>  }                                                                    \
>                                                                       \
> -void logic_outs##bw(unsigned long addr, const void *buffer,          \
> -                 unsigned int count)                                 \
> +void logic_outs##bw(unsigned long addr, const void *buf,             \
> +                 unsigned int cnt)                                   \
>  {                                                                    \
>       if (addr < MMIO_UPPER_LIMIT) {                                  \
> -             writes##bw(PCI_IOBASE + addr, buffer, count);           \
> +             writes##bw(PCI_IOBASE + addr, buf, cnt);                \
>       } else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \
> -             struct logic_pio_hwaddr *entry = find_io_range(addr);   \
> +             struct logic_pio_hwaddr *range = find_io_range(addr);   \
> +             size_t sz = sizeof(type);                               \
>                                                                       \
> -             if (entry && entry->ops)                                \
> -                     entry->ops->outs(entry->hostdata,               \
> -                             addr, buffer, sizeof(type), count);     \
> +             if (range && range->ops)                                \
> +                     range->ops->outs(range->hostdata,               \
> +                                      addr, buf, sz, cnt);           \
>               else                                                    \
>                       WARN_ON_ONCE(1);                                \
>       }                                                               \
>  }
>  
> +#else /* CONFIG_INDIRECT_PIO */
> +
> +#define BUILD_LOGIC_IO(bw, type)                                     \
> +type logic_in##bw(unsigned long addr)                                        
> \
> +{                                                                    \
> +     type ret = (type)~0;                                            \
> +                                                                     \
> +     if (addr < MMIO_UPPER_LIMIT)                                    \
> +             ret = read##bw(PCI_IOBASE + addr);                      \
> +     return ret;                                                     \
> +}                                                                    \
> +                                                                     \
> +void logic_out##bw(type value, unsigned long addr)                   \
> +{                                                                    \
> +     if (addr < MMIO_UPPER_LIMIT)                                    \
> +             write##bw(value, PCI_IOBASE + addr);                    \
> +}                                                                    \
> +                                                                     \
> +void logic_ins##bw(unsigned long addr, void *buf, unsigned int cnt)  \
> +{                                                                    \
> +     if (addr < MMIO_UPPER_LIMIT)                                    \
> +             reads##bw(PCI_IOBASE + addr, buf, cnt);                 \
> +}                                                                    \
> +                                                                     \
> +void logic_outs##bw(unsigned long addr, const void *buf,             \
> +                 unsigned int cnt)                                   \
> +{                                                                    \
> +     if (addr < MMIO_UPPER_LIMIT)                                    \
> +             writes##bw(PCI_IOBASE + addr, buf, cnt);                \
> +}
> +#endif /* CONFIG_INDIRECT_PIO */
> +
>  BUILD_LOGIC_IO(b, u8)
>  EXPORT_SYMBOL(logic_inb);
>  EXPORT_SYMBOL(logic_insb);
> @@ -277,4 +312,4 @@ EXPORT_SYMBOL(logic_insl);
>  EXPORT_SYMBOL(logic_outl);
>  EXPORT_SYMBOL(logic_outsl);
>  
> -#endif /* CONFIG_INDIRECT_PIO && PCI_IOBASE */
> +#endif /* PCI_IOBASE */
> -- 
> 2.17.1
> 

Reply via email to