X96 Max has the PHY reset and interrupt lines are identical to the Odroid-N2: - GPIOZ_14 is the interrupt on X96 Max - GPIOZ_15 is the reset line on X96 Max
Add GPIOZ_14 as PHY interrupt line on the X96 Max so we don't have to poll for the PHY status. Suggested-by: Neil Armstrong <[email protected]> Acked-by: Neil Armstrong <[email protected]> Tested-by: Neil Armstrong <[email protected]> Signed-off-by: Martin Blumenstingl <[email protected]> --- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 3f9385553132..fe4013cca876 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -289,6 +289,10 @@ reset-assert-us = <10000>; reset-deassert-us = <30000>; reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; }; }; -- 2.22.0
