From: Colin Ian King <colin.k...@canonical.com>
Currently the call to device_property_read_u32_array is not error checked
leading to potential garbage values in the delays array that are then used
in msleep delays. Add a sanity check to the property fetching.
Addresses-Coverity: ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.k...@canonical.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index da310de06bf6..5b7923c0698c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -242,6 +242,7 @@ int stmmac_mdio_reset(struct mii_bus *bus)
if (priv->device->of_node) {
struct gpio_desc *reset_gpio;
u32 delays[3];
+ int ret;
reset_gpio = devm_gpiod_get_optional(priv->device,
"snps,reset",
@@ -249,9 +250,15 @@ int stmmac_mdio_reset(struct mii_bus *bus)
if (IS_ERR(reset_gpio))
return PTR_ERR(reset_gpio);
- device_property_read_u32_array(priv->device,
- "snps,reset-delays-us",
- delays, ARRAY_SIZE(delays));
+ ret = device_property_read_u32_array(priv->device,
+ "snps,reset-delays-us",
+ delays,
+ ARRAY_SIZE(delays));
+ if (ret) {
+ dev_err(ndev->dev.parent,
+ "invalid property snps,reset-delays-us\n");
+ return -EINVAL;
+ }
if (delays[0])
msleep(DIV_ROUND_UP(delays[0], 1000));
--
2.20.1
