This patch tries to fix below issues reported by checkpatch
CHECK: Using comparison to true is error prone
CHECK: Using comparison to true is false prone
Signed-off-by: Hariprasad Kelam <hariprasad.ke...@gmail.com>
---
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c | 38 +++++++++++------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index 624188e..b0cc882 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -742,7 +742,7 @@ static void Hal_BT_EfusePowerSwitch(
)
{
u8 tempval;
- if (PwrState == true) {
+ if (PwrState) {
/* enable BT power cut */
/* 0x6A[14] = 1 */
tempval = rtw_read8(padapter, 0x6B);
@@ -783,7 +783,7 @@ static void Hal_EfusePowerSwitch(
u16 tmpV16;
- if (PwrState == true) {
+ if (PwrState) {
/* To avoid cannot access efuse regsiters after disable/enable
several times during DTM test. */
/* Suggested by SD1 IsaacHsu. 2013.07.08, added by tynli. */
tempval = rtw_read8(padapter,
SDIO_LOCAL_BASE|SDIO_REG_HSUS_CTRL);
@@ -833,7 +833,7 @@ static void Hal_EfusePowerSwitch(
rtw_write16(padapter, REG_SYS_CLKR, tmpV16);
}
- if (bWrite == true) {
+ if (bWrite) {
/* Enable LDO 2.5V before read/write action */
tempval = rtw_read8(padapter, EFUSE_TEST+3);
tempval &= 0x0F;
@@ -845,7 +845,7 @@ static void Hal_EfusePowerSwitch(
} else {
rtw_write8(padapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF);
- if (bWrite == true) {
+ if (bWrite) {
/* Disable LDO 2.5V after read/write action */
tempval = rtw_read8(padapter, EFUSE_TEST+3);
rtw_write8(padapter, EFUSE_TEST+3, (tempval & 0x7F));
@@ -2166,7 +2166,7 @@ static void UpdateHalRAMask8723B(struct adapter
*padapter, u32 mac_id, u8 rssi_l
}
#endif
- if (pHalData->fw_ractrl == true) {
+ if (pHalData->fw_ractrl) {
rtl8723b_set_FwMacIdConfig_cmd(padapter, mac_id, psta->raid,
psta->bw_mode, shortGIrate, mask);
}
@@ -2428,7 +2428,7 @@ void Hal_InitPGData(struct adapter *padapter, u8
*PROMContent)
{
struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
- if (false == pEEPROM->bautoload_fail_flag) { /* autoload OK. */
+ if (!pEEPROM->bautoload_fail_flag) { /* autoload OK. */
if (!pEEPROM->EepromOrEfuse) {
/* Read EFUSE real map to shadow. */
EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, false);
@@ -2436,7 +2436,7 @@ void Hal_InitPGData(struct adapter *padapter, u8
*PROMContent)
}
} else {/* autoload fail */
RT_TRACE(_module_hci_hal_init_c_, _drv_notice_, ("AutoLoad Fail
reported from CR9346!!\n"));
- if (false == pEEPROM->EepromOrEfuse)
+ if (!pEEPROM->EepromOrEfuse)
EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, false);
memcpy((void *)PROMContent, (void *)pEEPROM->efuse_eeprom_data,
HWSET_MAX_SIZE_8723B);
}
@@ -2842,12 +2842,12 @@ void Hal_EfuseParseThermalMeter_8723B(
/* */
/* ThermalMeter from EEPROM */
/* */
- if (false == AutoLoadFail)
+ if (!AutoLoadFail)
pHalData->EEPROMThermalMeter =
PROMContent[EEPROM_THERMAL_METER_8723B];
else
pHalData->EEPROMThermalMeter =
EEPROM_Default_ThermalMeter_8723B;
- if ((pHalData->EEPROMThermalMeter == 0xff) || (true == AutoLoadFail)) {
+ if ((pHalData->EEPROMThermalMeter == 0xff) || AutoLoadFail) {
pHalData->bAPKThermalMeterIgnore = true;
pHalData->EEPROMThermalMeter =
EEPROM_Default_ThermalMeter_8723B;
}
@@ -3094,12 +3094,12 @@ static void rtl8723b_fill_default_txdesc(
(pattrib->dhcp_pkt != 1) &&
(drv_userate != 1)
#ifdef CONFIG_AUTO_AP_MODE
- && (pattrib->pctrl != true)
+ && (!pattrib->pctrl)
#endif
) {
/* Non EAP & ARP & DHCP type data packet */
- if (pattrib->ampdu_en == true) {
+ if (pattrib->ampdu_en) {
ptxdesc->agg_en = 1; /* AGG EN */
ptxdesc->max_agg_num = 0x1f;
ptxdesc->ampdu_density = pattrib->ampdu_spacing;
@@ -3110,7 +3110,7 @@ static void rtl8723b_fill_default_txdesc(
ptxdesc->data_ratefb_lmt = 0x1F;
- if (pHalData->fw_ractrl == false) {
+ if (!pHalData->fw_ractrl) {
ptxdesc->userate = 1;
if
(pHalData->dmpriv.INIDATA_RATE[pattrib->mac_id] & BIT(7))
@@ -3162,7 +3162,7 @@ static void rtl8723b_fill_default_txdesc(
ptxdesc->mbssid = pattrib->mbssid & 0xF;
ptxdesc->rty_lmt_en = 1; /* retry limit enable */
- if (pattrib->retry_ctrl == true) {
+ if (pattrib->retry_ctrl) {
ptxdesc->data_rt_lmt = 6;
} else {
ptxdesc->data_rt_lmt = 12;
@@ -3265,14 +3265,14 @@ void rtl8723b_fill_fake_txdesc(
SET_TX_DESC_QUEUE_SEL_8723B(pDesc, QSLT_MGNT); /* Fixed queue of Mgnt
queue */
/* Set NAVUSEHDR to prevent Ps-poll AId filed to be changed to error
vlaue by Hw. */
- if (true == IsPsPoll) {
+ if (IsPsPoll) {
SET_TX_DESC_NAV_USE_HDR_8723B(pDesc, 1);
} else {
SET_TX_DESC_HWSEQ_EN_8723B(pDesc, 1); /* Hw set sequence
number */
SET_TX_DESC_HWSEQ_SEL_8723B(pDesc, 0);
}
- if (true == IsBTQosNull) {
+ if (IsBTQosNull) {
SET_TX_DESC_BT_INT_8723B(pDesc, 1);
}
@@ -3284,7 +3284,7 @@ void rtl8723b_fill_fake_txdesc(
/* */
/* Encrypt the data frame if under security mode excepct null data.
Suggested by CCW. */
/* */
- if (true == bDataFrame) {
+ if (bDataFrame) {
u32 EncAlg;
EncAlg = padapter->securitypriv.dot11PrivacyAlgrthm;
@@ -3759,7 +3759,7 @@ void C2HPacketHandler_8723B(struct adapter *padapter, u8
*pbuffer, u16 length)
#ifdef CONFIG_WOWLAN
struct pwrctrl_priv *pwrpriv = adapter_to_pwrctl(padapter);
- if (pwrpriv->wowlan_mode == true) {
+ if (pwrpriv->wowlan_mode) {
DBG_871X("%s(): return because wowolan_mode ==true! CMDID
=%d\n", __func__, pbuffer[0]);
return;
}
@@ -4119,7 +4119,7 @@ void SetHwReg8723B(struct adapter *padapter, u8 variable,
u8 *val)
/* keep sn */
padapter->xmitpriv.nqos_ssn = rtw_read16(padapter,
REG_NQOS_SEQ);
- if (pwrpriv->bkeepfwalive != true) {
+ if (!pwrpriv->bkeepfwalive) {
/* RX DMA stop */
val32 = rtw_read32(padapter, REG_RXPKT_NUM);
val32 |= RW_RELEASE_EN;
@@ -4274,7 +4274,7 @@ void GetHwReg8723B(struct adapter *padapter, u8 variable,
u8 *val)
u32 valRCR;
if (
- (padapter->bSurpriseRemoved == true) ||
+ padapter->bSurpriseRemoved ||
(adapter_to_pwrctl(padapter)->rf_pwrstate ==
rf_off)
) {
/* If it is in HW/SW Radio OFF or IPS state,
we do not check Fw LPS Leave, */
--
2.7.4
