On 6/19/19 21:05, Bjorn Andersson wrote:
> On Wed 19 Jun 11:56 PDT 2019, Jeffrey Hugo wrote:
>
>> spmi_regulator_set_voltage_time_sel() calculates the amount of delay
>> needed as the result of setting a new voltage. Essentially this is the
>> absolute difference of the old and new voltages, divided by the slew rate.
>>
>> The implementation of spmi_regulator_set_voltage_time_sel() is wrong.
>>
>> It attempts to calculate the difference in voltages by using the
>> difference in selectors and multiplying by the voltage step between
>> selectors. This ignores the possibility that the old and new selectors
>> might be from different ranges, which have different step values. Also,
>> the difference between the selectors may encapsulate N ranges inbetween,
>> so a summation of each selector change from old to new would be needed.
>>
>> Lets avoid all of that complexity, and just get the actual voltage
>> represented by both the old and new selector, and use those to directly
>> compute the voltage delta. This is more straight forward, and has the
>> side benifit of avoiding issues with regulator implementations that don't
>> have hardware register support to get the current configured range.
>>
>> Fixes: e92a4047419c ("regulator: Add QCOM SPMI regulator driver")
>> Reported-by: Bjorn Andersson <bjorn.anders...@linaro.org>
>> Reported-by: Jorge Ramirez-Ortiz <jorge.ramirez-or...@linaro.org>
>> Signed-off-by: Jeffrey Hugo <jeffrey.l.h...@gmail.com>
>
> Reviewed-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Tested on EVB-4000 using the cpufreq patchset that I still need to
repost v3 [1]
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-or...@linaro.org>
[1] https://patchwork.kernel.org/cover/10784383/
>
>> ---
>> drivers/regulator/qcom_spmi-regulator.c | 8 ++------
>> 1 file changed, 2 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/regulator/qcom_spmi-regulator.c
>> b/drivers/regulator/qcom_spmi-regulator.c
>> index 13f83be50076..877df33e0246 100644
>> --- a/drivers/regulator/qcom_spmi-regulator.c
>> +++ b/drivers/regulator/qcom_spmi-regulator.c
>> @@ -813,14 +813,10 @@ static int spmi_regulator_set_voltage_time_sel(struct
>> regulator_dev *rdev,
>> unsigned int old_selector, unsigned int new_selector)
>> {
>> struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
>> - const struct spmi_voltage_range *range;
>> int diff_uV;
>>
>> - range = spmi_regulator_find_range(vreg);
>> - if (!range)
>> - return -EINVAL;
>> -
>> - diff_uV = abs(new_selector - old_selector) * range->step_uV;
>> + diff_uV = abs(spmi_regulator_common_list_voltage(rdev, new_selector) -
>> + spmi_regulator_common_list_voltage(rdev, old_selector));
>>
>> return DIV_ROUND_UP(diff_uV, vreg->slew_rate);
>> }
>> --
>> 2.17.1
>>
>
