On 25/06/2019 at 10:48, Palmer Dabbelt wrote:
> commit c218ad559020 ("macb: Add support for SiFive FU540-C000") added a
> dependency on the common clock framework to the macb driver, but didn't
> express that dependency in Kconfig. As a result macb now fails to
> compile on systems without COMMON_CLK, which specifically causes a build
> failure on powerpc allyesconfig.
>
> This patch adds the dependency, which results in the macb driver no
> longer being selectable on systems without the common clock framework.
> All known systems that have this device already support the common clock
> framework, so this should not cause trouble for any uses. Supporting
> both the FU540-C000 and systems without COMMON_CLK is quite ugly.
>
> I've build tested this on powerpc allyesconfig and RISC-V defconfig
> (which selects MACB), but I have not even booted the resulting kernels.
>
> Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000")
> Signed-off-by: Palmer Dabbelt <pal...@sifive.com>
Acked-by: Nicolas Ferre <nicolas.fe...@microchip.com>
Thanks!
> ---
> drivers/net/ethernet/cadence/Kconfig | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/Kconfig
> b/drivers/net/ethernet/cadence/Kconfig
> index 1766697c9c5a..64d8d6ee7739 100644
> --- a/drivers/net/ethernet/cadence/Kconfig
> +++ b/drivers/net/ethernet/cadence/Kconfig
> @@ -21,7 +21,7 @@ if NET_VENDOR_CADENCE
>
> config MACB
> tristate "Cadence MACB/GEM support"
> - depends on HAS_DMA
> + depends on HAS_DMA && COMMON_CLK
> select PHYLIB
> ---help---
> The Cadence MACB ethernet interface is found on many Atmel AT32 and
> @@ -42,7 +42,7 @@ config MACB_USE_HWSTAMP
>
> config MACB_PCI
> tristate "Cadence PCI MACB/GEM support"
> - depends on MACB && PCI && COMMON_CLK
> + depends on MACB && PCI
> ---help---
> This is PCI wrapper for MACB driver.
>
>
--
Nicolas Ferre
