On Mon, Jun 24, 2019 at 09:32:11PM +0530, Jagan Teki wrote: > On Mon, Jun 24, 2019 at 6:34 PM Maxime Ripard <maxime.rip...@bootlin.com> > wrote: > > > > On Fri, Jun 14, 2019 at 05:33:23PM +0530, Jagan Teki wrote: > > > On Thu, Jun 13, 2019 at 7:28 PM Maxime Ripard <maxime.rip...@bootlin.com> > > > wrote: > > > > > > > > On Wed, Jun 05, 2019 at 01:11:44PM +0530, Jagan Teki wrote: > > > > > On Tue, Jun 4, 2019 at 8:00 PM Maxime Ripard > > > > > <maxime.rip...@bootlin.com> wrote: > > > > > > > > > > > > On Fri, May 24, 2019 at 03:37:36PM +0530, Jagan Teki wrote: > > > > > > > On Fri, May 24, 2019 at 2:18 AM Maxime Ripard > > > > > > > <maxime.rip...@bootlin.com> wrote: > > > > > > > > > > > > > > > > On Mon, May 20, 2019 at 02:33:11PM +0530, Jagan Teki wrote: > > > > > > > > > pll-video => pll-mipi => tcon0 => tcon0-pixel-clock is the > > > > > > > > > typical > > > > > > > > > MIPI clock topology in Allwinner DSI controller. > > > > > > > > > > > > > > > > > > TCON dotclock driver is computing the desired DCLK divider > > > > > > > > > based on > > > > > > > > > panel pixel clock along with input DCLK min, max divider > > > > > > > > > values from > > > > > > > > > tcon driver and that would eventually set the pll-mipi clock > > > > > > > > > rate. > > > > > > > > > > > > > > > > > > The current code is passing dsi min and max divider value as > > > > > > > > > 4 via > > > > > > > > > tcon driver which would ended-up triggering below vblank wait > > > > > > > > > timed out > > > > > > > > > warning on "bananapi,s070wv20-ct16" panel. > > > > > > > > > > > > > > > > > > WARNING: CPU: 0 PID: 31 at > > > > > > > > > drivers/gpu/drm/drm_atomic_helper.c:1429 > > > > > > > > > drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0 > > > > > > > > > [CRTC:46:crtc-0] vblank wait timed out > > > > > > > > > Modules linked in: > > > > > > > > > CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted > > > > > > > > > 5.1.0-next-20190514-00025-g5186cdf10757-dirty #6 > > > > > > > > > Hardware name: Allwinner sun8i Family > > > > > > > > > Workqueue: events deferred_probe_work_func > > > > > > > > > [<c010ed54>] (unwind_backtrace) from [<c010b76c>] > > > > > > > > > (show_stack+0x10/0x14) > > > > > > > > > [<c010b76c>] (show_stack) from [<c0688c70>] > > > > > > > > > (dump_stack+0x84/0x98) > > > > > > > > > [<c0688c70>] (dump_stack) from [<c011d9e4>] > > > > > > > > > (__warn+0xfc/0x114) > > > > > > > > > [<c011d9e4>] (__warn) from [<c011da40>] > > > > > > > > > (warn_slowpath_fmt+0x44/0x68) > > > > > > > > > [<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] > > > > > > > > > (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0) > > > > > > > > > [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) > > > > > > > > > from [<c040e694>] > > > > > > > > > (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c) > > > > > > > > > [<c040e694>] (drm_atomic_helper_commit_tail_rpm) from > > > > > > > > > [<c040e4dc>] (commit_tail+0x40/0x6c) > > > > > > > > > [<c040e4dc>] (commit_tail) from [<c040e5cc>] > > > > > > > > > (drm_atomic_helper_commit+0xbc/0x128) > > > > > > > > > [<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] > > > > > > > > > (restore_fbdev_mode_atomic+0x1cc/0x1dc) > > > > > > > > > [<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] > > > > > > > > > (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0) > > > > > > > > > [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) > > > > > > > > > from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54) > > > > > > > > > [<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] > > > > > > > > > (fbcon_init+0x560/0x5ac) > > > > > > > > > [<c03ad450>] (fbcon_init) from [<c03eb8a0>] > > > > > > > > > (visual_init+0xbc/0x104) > > > > > > > > > [<c03eb8a0>] (visual_init) from [<c03ed1b8>] > > > > > > > > > (do_bind_con_driver+0x1b0/0x390) > > > > > > > > > [<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] > > > > > > > > > (do_take_over_console+0x13c/0x1c4) > > > > > > > > > [<c03ed780>] (do_take_over_console) from [<c03ad800>] > > > > > > > > > (do_fbcon_takeover+0x74/0xcc) > > > > > > > > > [<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] > > > > > > > > > (notifier_call_chain+0x44/0x84) > > > > > > > > > [<c013c9c8>] (notifier_call_chain) from [<c013cd20>] > > > > > > > > > (__blocking_notifier_call_chain+0x48/0x60) > > > > > > > > > [<c013cd20>] (__blocking_notifier_call_chain) from > > > > > > > > > [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20) > > > > > > > > > [<c013cd50>] (blocking_notifier_call_chain) from > > > > > > > > > [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8) > > > > > > > > > [<c03a6e44>] (register_framebuffer) from [<c04153c0>] > > > > > > > > > (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c) > > > > > > > > > [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) > > > > > > > > > from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8) > > > > > > > > > [<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] > > > > > > > > > (drm_fbdev_generic_setup+0x88/0x118) > > > > > > > > > [<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] > > > > > > > > > (sun4i_drv_bind+0x128/0x160) > > > > > > > > > [<c043f060>] (sun4i_drv_bind) from [<c044b588>] > > > > > > > > > (try_to_bring_up_master+0x164/0x1a0) > > > > > > > > > [<c044b588>] (try_to_bring_up_master) from [<c044b658>] > > > > > > > > > (__component_add+0x94/0x140) > > > > > > > > > [<c044b658>] (__component_add) from [<c0445e0c>] > > > > > > > > > (sun6i_dsi_probe+0x144/0x234) > > > > > > > > > [<c0445e0c>] (sun6i_dsi_probe) from [<c0452ee4>] > > > > > > > > > (platform_drv_probe+0x48/0x9c) > > > > > > > > > [<c0452ee4>] (platform_drv_probe) from [<c04512bc>] > > > > > > > > > (really_probe+0x1dc/0x2c8) > > > > > > > > > [<c04512bc>] (really_probe) from [<c0451508>] > > > > > > > > > (driver_probe_device+0x60/0x160) > > > > > > > > > [<c0451508>] (driver_probe_device) from [<c044f794>] > > > > > > > > > (bus_for_each_drv+0x74/0xb8) > > > > > > > > > [<c044f794>] (bus_for_each_drv) from [<c045106c>] > > > > > > > > > (__device_attach+0xd0/0x13c) > > > > > > > > > [<c045106c>] (__device_attach) from [<c0450464>] > > > > > > > > > (bus_probe_device+0x84/0x8c) > > > > > > > > > [<c0450464>] (bus_probe_device) from [<c04508f0>] > > > > > > > > > (deferred_probe_work_func+0x64/0x90) > > > > > > > > > [<c04508f0>] (deferred_probe_work_func) from [<c0135970>] > > > > > > > > > (process_one_work+0x204/0x420) > > > > > > > > > [<c0135970>] (process_one_work) from [<c013690c>] > > > > > > > > > (worker_thread+0x274/0x5a0) > > > > > > > > > [<c013690c>] (worker_thread) from [<c013b3d8>] > > > > > > > > > (kthread+0x11c/0x14c) > > > > > > > > > [<c013b3d8>] (kthread) from [<c01010e8>] > > > > > > > > > (ret_from_fork+0x14/0x2c) > > > > > > > > > Exception stack(0xde539fb0 to 0xde539ff8) > > > > > > > > > 9fa0: 00000000 00000000 > > > > > > > > > 00000000 00000000 > > > > > > > > > 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 > > > > > > > > > 00000000 00000000 > > > > > > > > > 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 > > > > > > > > > ---[ end trace 4017fea4906ab391 ]--- > > > > > > > > > > > > > > > > > > But accordingly to Allwinner A33, A64 BSP codes [1] [2] this > > > > > > > > > divider > > > > > > > > > is clearly using 'format/lanes' for dsi divider value, > > > > > > > > > dsi_clk.clk_div > > > > > > > > > > > > > > > > > > Which would compute the pll_freq and set a clock rate for it > > > > > > > > > in > > > > > > > > > [3] and [4] respectively. > > > > > > > > > > > > > > > > > > The same issue has reproduced in A33, A64 with 4-lane and > > > > > > > > > 2-lane devices > > > > > > > > > and got fixed with this computation logic 'format/lanes', so > > > > > > > > > this patch > > > > > > > > > using dclk min and max dividers as per BSP. > > > > > > > > > > > > > > > > > > [1] > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M2M-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp/de/disp_lcd.c#L1106 > > > > > > > > > [2] > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L213 > > > > > > > > > [3] > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M2M-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp/de/disp_lcd.c#L1127 > > > > > > > > > [4] > > > > > > > > > https://github.com/BPI-SINOVOIP/BPI-M2M-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp/de/disp_lcd.c#L1161 > > > > > > > > > > > > > > > > In that mail, I've pointed out that clk_div isn't used for the > > > > > > > > TCON dclk divider: > > > > > > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2019-February/629596.html > > > > > > > > > > > > > > > > The only reply you've sent is that you indeed see that the > > > > > > > > divider is > > > > > > > > set to 4 in the BSP, but you're now saying that the BSP can > > > > > > > > change > > > > > > > > it. If so, then please point exactly the flaw in the > > > > > > > > explanation in > > > > > > > > that mail. > > > > > > > > > > > > > > Frankly, I have explained these details in commit message and > > > > > > > previous > > > > > > > version patch[1] with print messages on the code. > > > > > > > > > > > > > > BSP has tcon_div and dsi_div. dsi_div is dynamic which depends on > > > > > > > bpp/lanes and it indeed depends on PLL computation (not tcon_div), > > > > > > > anyway I have explained again on this initial link you mentioned. > > > > > > > Please have a look and get back. > > > > > > > > > > > > I'll have a look, thanks. > > > > > > > > > > > > I've given your patches a try on my setup though, and this patch > > > > > > breaks it with vblank timeouts and some horizontal lines that looks > > > > > > like what should be displayed, but blinking and on the right of the > > > > > > display. The previous ones are fine though. > > > > > > > > > > Would you please send me the link of panel driver. > > > > > > > > It's drivers/gpu/drm/panel/panel-ronbo-rb070d30.c > > > > > > Look like this panel work even w/o any vendor sequence. it's similar > > > to the 4-lane panel I have with RGB888, so the dclk div is 6, is it > > > working with this divider? > > > > It works with 4, it doesn't work with 6. > > Can be the pixel clock with associated timings can make this diff. > Would you send me the pixel clock, pll_rate and timings this panel > used it from BSP?
This board never had an Allwinner BSP Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
signature.asc
Description: PGP signature
