On Mon, Jun 10, 2019 at 11:34:42AM +0300, Talel Shenhar wrote:
> Document Amazon's Annapurna Labs Fabric Interrupt Controller SoC binding.
>
> Signed-off-by: Talel Shenhar <ta...@amazon.com>
> ---
> .../interrupt-controller/amazon,al-fic.txt | 29
> ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
>
> diff --git
> a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> new file mode 100644
> index 0000000..4e82fd5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
> @@ -0,0 +1,29 @@
> +Amazon's Annapurna Labs Fabric Interrupt Controller
> +
> +Required properties:
> +
> +- compatible: should be "amazon,al-fic"
> +- reg: physical base address and size of the registers
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: must be 2.
> + First cell defines the index of the interrupt within the controller.
> + Second cell is used to specify the trigger type and must be one of the
> + following:
> + - bits[3:0] trigger type and level flags
> + 1 = low-to-high edge triggered
> + 4 = active high level-sensitive
No need to define this here. Reference the standard definition.
> +- interrupt-parent: specifies the parent interrupt controller.
Drop this. It is implied and could be in the parent.
> +- interrupts: describes which input line in the interrupt parent, this
> + fic's output is connected to. This field property depends on the parent's
> + binding
> +
> +Example:
> +
> +amazon_fic: interrupt-controller@0xfd8a8500 {
Drop the '0x'
> + compatible = "amazon,al-fic";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + reg = <0x0 0xfd8a8500 0x0 0x1000>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
> +};
> --
> 2.7.4
>
