Marc, should I publish those fixes as new patch that updates the
dt-bindings or new patchset to this list?
On 7/9/2019 5:23 AM, Rob Herring wrote:
On Mon, Jun 10, 2019 at 11:34:42AM +0300, Talel Shenhar wrote:
+- #interrupt-cells: must be 2.
+ First cell defines the index of the interrupt within the controller.
+ Second cell is used to specify the trigger type and must be one of the
+ following:
+ - bits[3:0] trigger type and level flags
+ 1 = low-to-high edge triggered
+ 4 = active high level-sensitive
No need to define this here. Reference the standard definition.
This device only support those two modes.
This definition tries to capture the supported modes.
Should I just state that those two modes are supported and then avoid
the actual bits and values?
+- interrupt-parent: specifies the parent interrupt controller.
Drop this. It is implied and could be in the parent.
ack
+- interrupts: describes which input line in the interrupt parent, this
+ fic's output is connected to. This field property depends on the parent's
+ binding
+
+Example:
+
+amazon_fic: interrupt-controller@0xfd8a8500 {
Drop the '0x'
ack
