[PATCH 04/10] ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01

[Stefan Riedmueller]

Fix node name for the user LEDs to prevent the pinctrl of the phyCORE's
leds node from being overwritten. Also use more generic names for user
LEDs.

Signed-off-by: Stefan Riedmueller <s.riedmuel...@phytec.de>
---
 arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi       |  3 +--
 arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi | 16 +++++++++-------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi 
b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 1b745582911c..73266b4a889b 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -31,8 +31,7 @@
                pinctrl-0 = <&pinctrl_gpioleds_som>;
                compatible = "gpio-leds";
 
-               led_green {
-                       label = "phycore:green";
+               phycore-green {
                        gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "heartbeat";
                };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi 
b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
index e2f38f39a6ad..2f3fd32a1167 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -21,20 +21,22 @@
                };
        };
 
-       user_leds: leds {
+       user_leds: user-leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_user_leds>;
                status = "disabled";
 
-               led_yellow {
-                       gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "default-on";
+               user-led1 {
+                       gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "gpio";
+                       default-state = "on";
                };
 
-               led_red {
-                       gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "default-on";
+               user-led2 {
+                       gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "gpio";
+                       default-state = "on";
                };
        };
 };
-- 
2.7.4