The ECSPI interface is available on the expansion connector of every
PHYTEC phyBOARD-Segin. Move its definition to the board include file
for better reuse.
Signed-off-by: Stefan Riedmueller <s.riedmuel...@phytec.de>
---
arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 14 --------------
arch/arm/boot/dts/imx6ul-phytec-segin.dtsi | 16 ++++++++++++++++
2 files changed, 16 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index c6ef13685a7c..32d90c67a6f2 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -28,9 +28,6 @@
};
&ecspi3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi3>;
- cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -93,14 +90,3 @@
&usdhc1 {
status = "okay";
};
-
-&iomuxc {
- pinctrl_ecspi3: ecspi3grp {
- fsl,pins = <
- MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0
- MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0
- MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0
- MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 7cd24ec40c36..8d5f8dc6ad58 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -103,6 +103,13 @@
assigned-clock-rates = <786432000>;
};
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+};
+
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
@@ -225,6 +232,15 @@
>;
};
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0
+ MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0
+ MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0
+ MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0
+ >;
+ };
+
pinctrl_enet2: enet2grp {
fsl,pins = <
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
--
2.7.4
