Reuse opp core code for setting bus clock and voltage. As a side
effect this allow useage of coupled regulators feature (required
for boards using Exynos5422/5800 SoCs) because dev_pm_opp_set_rate()
uses regulator_set_voltage_triplet() for setting regulator voltage
while the old code used regulator_set_voltage_tol() with fixed
tolerance. This patch also removes no longer needed parsing of DT
property "exynos,voltage-tolerance" (no Exynos devfreq DT node uses
it).

Signed-off-by: Kamil Konieczny <k.koniec...@partner.samsung.com>
---
 drivers/devfreq/exynos-bus.c | 172 ++++++++++++++---------------------
 1 file changed, 66 insertions(+), 106 deletions(-)

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 486cc5b422f1..7fc4f76bd848 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -25,7 +25,6 @@
 #include <linux/slab.h>
 
 #define DEFAULT_SATURATION_RATIO       40
-#define DEFAULT_VOLTAGE_TOLERANCE      2
 
 struct exynos_bus {
        struct device *dev;
@@ -37,9 +36,9 @@ struct exynos_bus {
 
        unsigned long curr_freq;
 
-       struct regulator *regulator;
+       struct opp_table *opp_table;
+
        struct clk *clk;
-       unsigned int voltage_tolerance;
        unsigned int ratio;
 };
 
@@ -99,56 +98,25 @@ static int exynos_bus_target(struct device *dev, unsigned 
long *freq, u32 flags)
 {
        struct exynos_bus *bus = dev_get_drvdata(dev);
        struct dev_pm_opp *new_opp;
-       unsigned long old_freq, new_freq, new_volt, tol;
        int ret = 0;
-
-       /* Get new opp-bus instance according to new bus clock */
+       /*
+        * New frequency for bus may not be exactly matched to opp, adjust
+        * *freq to correct value.
+        */
        new_opp = devfreq_recommended_opp(dev, freq, flags);
        if (IS_ERR(new_opp)) {
                dev_err(dev, "failed to get recommended opp instance\n");
                return PTR_ERR(new_opp);
        }
 
-       new_freq = dev_pm_opp_get_freq(new_opp);
-       new_volt = dev_pm_opp_get_voltage(new_opp);
        dev_pm_opp_put(new_opp);
 
-       old_freq = bus->curr_freq;
-
-       if (old_freq == new_freq)
-               return 0;
-       tol = new_volt * bus->voltage_tolerance / 100;
-
        /* Change voltage and frequency according to new OPP level */
        mutex_lock(&bus->lock);
+       ret = dev_pm_opp_set_rate(dev, *freq);
+       if (!ret)
+               bus->curr_freq = *freq;
 
-       if (old_freq < new_freq) {
-               ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
-               if (ret < 0) {
-                       dev_err(bus->dev, "failed to set voltage\n");
-                       goto out;
-               }
-       }
-
-       ret = clk_set_rate(bus->clk, new_freq);
-       if (ret < 0) {
-               dev_err(dev, "failed to change clock of bus\n");
-               clk_set_rate(bus->clk, old_freq);
-               goto out;
-       }
-
-       if (old_freq > new_freq) {
-               ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
-               if (ret < 0) {
-                       dev_err(bus->dev, "failed to set voltage\n");
-                       goto out;
-               }
-       }
-       bus->curr_freq = new_freq;
-
-       dev_dbg(dev, "Set the frequency of bus (%luHz -> %luHz, %luHz)\n",
-                       old_freq, new_freq, clk_get_rate(bus->clk));
-out:
        mutex_unlock(&bus->lock);
 
        return ret;
@@ -194,10 +162,11 @@ static void exynos_bus_exit(struct device *dev)
        if (ret < 0)
                dev_warn(dev, "failed to disable the devfreq-event devices\n");
 
-       if (bus->regulator)
-               regulator_disable(bus->regulator);
+       if (bus->opp_table)
+               dev_pm_opp_put_regulators(bus->opp_table);
 
        dev_pm_opp_of_remove_table(dev);
+
        clk_disable_unprepare(bus->clk);
 }
 
@@ -209,39 +178,26 @@ static int exynos_bus_passive_target(struct device *dev, 
unsigned long *freq,
 {
        struct exynos_bus *bus = dev_get_drvdata(dev);
        struct dev_pm_opp *new_opp;
-       unsigned long old_freq, new_freq;
-       int ret = 0;
+       int ret;
 
-       /* Get new opp-bus instance according to new bus clock */
+       /*
+        * New frequency for bus may not be exactly matched to opp, adjust
+        * *freq to correct value.
+        */
        new_opp = devfreq_recommended_opp(dev, freq, flags);
        if (IS_ERR(new_opp)) {
                dev_err(dev, "failed to get recommended opp instance\n");
                return PTR_ERR(new_opp);
        }
 
-       new_freq = dev_pm_opp_get_freq(new_opp);
        dev_pm_opp_put(new_opp);
 
-       old_freq = bus->curr_freq;
-
-       if (old_freq == new_freq)
-               return 0;
-
        /* Change the frequency according to new OPP level */
        mutex_lock(&bus->lock);
+       ret = dev_pm_opp_set_rate(dev, *freq);
+       if (!ret)
+               bus->curr_freq = *freq;
 
-       ret = clk_set_rate(bus->clk, new_freq);
-       if (ret < 0) {
-               dev_err(dev, "failed to set the clock of bus\n");
-               goto out;
-       }
-
-       *freq = new_freq;
-       bus->curr_freq = new_freq;
-
-       dev_dbg(dev, "Set the frequency of bus (%luHz -> %luHz, %luHz)\n",
-                       old_freq, new_freq, clk_get_rate(bus->clk));
-out:
        mutex_unlock(&bus->lock);
 
        return ret;
@@ -259,20 +215,7 @@ static int exynos_bus_parent_parse_of(struct device_node 
*np,
                                        struct exynos_bus *bus)
 {
        struct device *dev = bus->dev;
-       int i, ret, count, size;
-
-       /* Get the regulator to provide each bus with the power */
-       bus->regulator = devm_regulator_get(dev, "vdd");
-       if (IS_ERR(bus->regulator)) {
-               dev_err(dev, "failed to get VDD regulator\n");
-               return PTR_ERR(bus->regulator);
-       }
-
-       ret = regulator_enable(bus->regulator);
-       if (ret < 0) {
-               dev_err(dev, "failed to enable VDD regulator\n");
-               return ret;
-       }
+       int i, count, size;
 
        /*
         * Get the devfreq-event devices to get the current utilization of
@@ -281,24 +224,20 @@ static int exynos_bus_parent_parse_of(struct device_node 
*np,
        count = devfreq_event_get_edev_count(dev);
        if (count < 0) {
                dev_err(dev, "failed to get the count of devfreq-event dev\n");
-               ret = count;
-               goto err_regulator;
+               return count;
        }
+
        bus->edev_count = count;
 
        size = sizeof(*bus->edev) * count;
        bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
-       if (!bus->edev) {
-               ret = -ENOMEM;
-               goto err_regulator;
-       }
+       if (!bus->edev)
+               return -ENOMEM;
 
        for (i = 0; i < count; i++) {
                bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, i);
-               if (IS_ERR(bus->edev[i])) {
-                       ret = -EPROBE_DEFER;
-                       goto err_regulator;
-               }
+               if (IS_ERR(bus->edev[i]))
+                       return -EPROBE_DEFER;
        }
 
        /*
@@ -314,22 +253,15 @@ static int exynos_bus_parent_parse_of(struct device_node 
*np,
        if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio))
                bus->ratio = DEFAULT_SATURATION_RATIO;
 
-       if (of_property_read_u32(np, "exynos,voltage-tolerance",
-                                       &bus->voltage_tolerance))
-               bus->voltage_tolerance = DEFAULT_VOLTAGE_TOLERANCE;
-
        return 0;
-
-err_regulator:
-       regulator_disable(bus->regulator);
-
-       return ret;
 }
 
 static int exynos_bus_parse_of(struct device_node *np,
-                             struct exynos_bus *bus)
+                             struct exynos_bus *bus, bool passive)
 {
        struct device *dev = bus->dev;
+       struct opp_table *opp_table;
+       const char *vdd = "vdd";
        struct dev_pm_opp *opp;
        unsigned long rate;
        int ret;
@@ -347,11 +279,22 @@ static int exynos_bus_parse_of(struct device_node *np,
                return ret;
        }
 
+       if (!passive) {
+               opp_table = dev_pm_opp_set_regulators(dev, &vdd, 1);
+               if (IS_ERR(opp_table)) {
+                       ret = PTR_ERR(opp_table);
+                       dev_err(dev, "failed to set regulators %d\n", ret);
+                       goto err_clk;
+               }
+
+               bus->opp_table = opp_table;
+       }
+
        /* Get the freq and voltage from OPP table to scale the bus freq */
        ret = dev_pm_opp_of_add_table(dev);
        if (ret < 0) {
                dev_err(dev, "failed to get OPP table\n");
-               goto err_clk;
+               goto err_regulator;
        }
 
        rate = clk_get_rate(bus->clk);
@@ -362,6 +305,7 @@ static int exynos_bus_parse_of(struct device_node *np,
                ret = PTR_ERR(opp);
                goto err_opp;
        }
+
        bus->curr_freq = dev_pm_opp_get_freq(opp);
        dev_pm_opp_put(opp);
 
@@ -369,6 +313,13 @@ static int exynos_bus_parse_of(struct device_node *np,
 
 err_opp:
        dev_pm_opp_of_remove_table(dev);
+
+err_regulator:
+       if (bus->opp_table) {
+               dev_pm_opp_put_regulators(bus->opp_table);
+               bus->opp_table = NULL;
+       }
+
 err_clk:
        clk_disable_unprepare(bus->clk);
 
@@ -386,6 +337,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
        struct exynos_bus *bus;
        int ret, max_state;
        unsigned long min_freq, max_freq;
+       bool passive = false;
 
        if (!np) {
                dev_err(dev, "failed to find devicetree node\n");
@@ -395,12 +347,18 @@ static int exynos_bus_probe(struct platform_device *pdev)
        bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
        if (!bus)
                return -ENOMEM;
+
        mutex_init(&bus->lock);
        bus->dev = &pdev->dev;
        platform_set_drvdata(pdev, bus);
+       node = of_parse_phandle(dev->of_node, "devfreq", 0);
+       if (node) {
+               of_node_put(node);
+               passive = true;
+       }
 
        /* Parse the device-tree to get the resource information */
-       ret = exynos_bus_parse_of(np, bus);
+       ret = exynos_bus_parse_of(np, bus, passive);
        if (ret < 0)
                return ret;
 
@@ -410,13 +368,10 @@ static int exynos_bus_probe(struct platform_device *pdev)
                goto err;
        }
 
-       node = of_parse_phandle(dev->of_node, "devfreq", 0);
-       if (node) {
-               of_node_put(node);
+       if (passive)
                goto passive;
-       } else {
-               ret = exynos_bus_parent_parse_of(np, bus);
-       }
+
+       ret = exynos_bus_parent_parse_of(np, bus);
 
        if (ret < 0)
                goto err;
@@ -509,6 +464,11 @@ static int exynos_bus_probe(struct platform_device *pdev)
 
 err:
        dev_pm_opp_of_remove_table(dev);
+       if (bus->opp_table) {
+               dev_pm_opp_put_regulators(bus->opp_table);
+               bus->opp_table = NULL;
+       }
+
        clk_disable_unprepare(bus->clk);
 
        return ret;
-- 
2.22.0

Reply via email to