[PATCH v1 20/50] ARM: dts: exynos: change and rename FSYS OPP table in Exynos5420

[Lukasz Luba]

The FSYS and FSYS2 buses have similar characteristics and both have max
frequency 240MHz. The old OPP table bus_fsys_apb_opp_table should be used
only to FSYS APB bus because APB max frequency is 200MHz.
The new OPPs for FSYS should increase its performance and related devices.

Signed-off-by: Lukasz Luba <l.l...@partner.samsung.com>
---
 arch/arm/boot/dts/exynos5420.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi 
b/arch/arm/boot/dts/exynos5420.dtsi
index 941c58bdd809..c7fc4b829b2a 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -995,7 +995,7 @@
                        compatible = "samsung,exynos-bus";
                        clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
                        clock-names = "bus";
-                       operating-points-v2 = <&bus_fsys_apb_opp_table>;
+                       operating-points-v2 = <&bus_fsys_opp_table>;
                        status = "disabled";
                };
 
@@ -1003,7 +1003,7 @@
                        compatible = "samsung,exynos-bus";
                        clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
                        clock-names = "bus";
-                       operating-points-v2 = <&bus_fsys2_opp_table>;
+                       operating-points-v2 = <&bus_fsys_opp_table>;
                        status = "disabled";
                };
 
@@ -1157,7 +1157,7 @@
                        };
                };
 
-               bus_fsys2_opp_table: opp_table5 {
+               bus_fsys_opp_table: opp_table5 {
                        compatible = "operating-points-v2";
 
                        opp00 {
-- 
2.17.1