The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at
the interconnect target module level for the modules that have it
defined. Otherwise we get the following warnings:

dts flag should be at module level for ti,no-idle-on-init
dts flag should be at module level for ti,no-reset-on-init

Signed-off-by: Tony Lindgren <t...@atomide.com>
---
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +-
 arch/arm/boot/dts/dra7-evm.dts                  | 2 +-
 arch/arm/boot/dts/dra7-l4.dtsi                  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi 
b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -379,7 +379,7 @@
        };
 };
 
-&gpio7 {
+&gpio7_target {
        ti,no-reset-on-init;
        ti,no-idle-on-init;
 };
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -498,7 +498,7 @@
        phy-supply = <&ldousb_reg>;
 };
 
-&gpio7 {
+&gpio7_target {
        ti,no-reset-on-init;
        ti,no-idle-on-init;
 };
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1261,7 +1261,7 @@
                        };
                };
 
-               target-module@51000 {                   /* 0x48051000, ap 45 
2e.0 */
+               gpio7_target: target-module@51000 {             /* 0x48051000, 
ap 45 2e.0 */
                        compatible = "ti,sysc-omap2", "ti,sysc";
                        ti,hwmods = "gpio7";
                        reg = <0x51000 0x4>,
-- 
2.21.0

Reply via email to