Previously the register interface was not attached to any internal bus,
which is not correct - it lives on the APB.
Cc: Stefan M Schaeckeler <sscha...@cisco.com>
Signed-off-by: Andrew Jeffery <and...@aj.id.au>
---
arch/arm/boot/dts/aspeed-g5.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5b1ca265c2ce..7723afc7c249 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -47,13 +47,6 @@
reg = <0x80000000 0>;
};
- edac: sdram@1e6e0000 {
- compatible = "aspeed,ast2500-sdram-edac";
- reg = <0x1e6e0000 0x174>;
- interrupts = <0>;
- status = "disabled";
- };
-
ahb {
compatible = "simple-bus";
#address-cells = <1>;
@@ -206,6 +199,13 @@
#size-cells = <1>;
ranges;
+ edac: sdram@1e6e0000 {
+ compatible = "aspeed,ast2500-sdram-edac";
+ reg = <0x1e6e0000 0x174>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
syscon: syscon@1e6e2000 {
compatible = "aspeed,ast2500-scu", "syscon",
"simple-mfd";
reg = <0x1e6e2000 0x1a8>;
--
2.20.1
