On Fri, Jul 26, 2019 at 2:50 PM Antoine Tenart
<[email protected]> wrote:
>
> Hi Matteo,
>
> On Fri, Jul 26, 2019 at 01:19:31AM +0200, Matteo Croce wrote:
> > The MTU change code can call napi_disable() with the device already down,
> > leading to a deadlock. Also, lot of code is duplicated unnecessarily.
> >
> > Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code.
> >
> > Signed-off-by: Matteo Croce <[email protected]>
>
> As this is a fix sent to net, you could add a Fixes: tag.
>
> Otherwise this looks good,
> Acked-by: Antoine Tenart <[email protected]>
>
> Thanks!
> Antoine
>
> > ---
> > .../net/ethernet/marvell/mvpp2/mvpp2_main.c | 41 ++++++-------------
> > 1 file changed, 13 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > index 2f7286bd203b..60eb98f99571 100644
> > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> > @@ -3612,6 +3612,7 @@ static int mvpp2_set_mac_address(struct net_device
> > *dev, void *p)
> > static int mvpp2_change_mtu(struct net_device *dev, int mtu)
> > {
> > struct mvpp2_port *port = netdev_priv(dev);
> > + bool running = netif_running(dev);
> > int err;
> >
> > if (!IS_ALIGNED(MVPP2_RX_PKT_SIZE(mtu), 8)) {
> > @@ -3620,40 +3621,24 @@ static int mvpp2_change_mtu(struct net_device *dev,
> > int mtu)
> > mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8);
> > }
> >
> > - if (!netif_running(dev)) {
> > - err = mvpp2_bm_update_mtu(dev, mtu);
> > - if (!err) {
> > - port->pkt_size = MVPP2_RX_PKT_SIZE(mtu);
> > - return 0;
> > - }
> > -
> > - /* Reconfigure BM to the original MTU */
> > - err = mvpp2_bm_update_mtu(dev, dev->mtu);
> > - if (err)
> > - goto log_error;
> > - }
> > -
> > - mvpp2_stop_dev(port);
> > + if (running)
> > + mvpp2_stop_dev(port);
> >
> > err = mvpp2_bm_update_mtu(dev, mtu);
> > - if (!err) {
> > + if (err) {
> > + netdev_err(dev, "failed to change MTU\n");
> > + /* Reconfigure BM to the original MTU */
> > + mvpp2_bm_update_mtu(dev, dev->mtu);
> > + } else {
> > port->pkt_size = MVPP2_RX_PKT_SIZE(mtu);
> > - goto out_start;
> > }
> >
> > - /* Reconfigure BM to the original MTU */
> > - err = mvpp2_bm_update_mtu(dev, dev->mtu);
> > - if (err)
> > - goto log_error;
> > -
> > -out_start:
> > - mvpp2_start_dev(port);
> > - mvpp2_egress_enable(port);
> > - mvpp2_ingress_enable(port);
> > + if (running) {
> > + mvpp2_start_dev(port);
> > + mvpp2_egress_enable(port);
> > + mvpp2_ingress_enable(port);
> > + }
> >
> > - return 0;
> > -log_error:
> > - netdev_err(dev, "failed to change MTU\n");
> > return err;
> > }
> >
> > --
> > 2.21.0
> >
>
> --
> Antoine Ténart, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
It seems to me that the fixes tag should refer to the driver inclusion:
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375
network unit")
--
Matteo Croce
per aspera ad upstream
