From: Philippe Schenker <philippe.schen...@toradex.com> This adds the proper phy-supply to the fec. This supply is actually switched by a clock that is now properly stated. This adds the advantage to add a delay for that particular regulator that is needed.
Signed-off-by: Philippe Schenker <philippe.schen...@toradex.com> --- arch/arm/boot/dts/imx6ull-colibri.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 9ad1da159768..a15f0807e9b0 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -47,6 +47,17 @@ states = <1800000 0x1 3300000 0x0>; vin-supply = <®_module_3v3>; }; + + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "eth_phy"; + regulator-type = "voltage"; + vin-supply = <®_module_3v3>; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + startup-delay-us = <150000>; + }; }; &adc1 { @@ -66,6 +77,7 @@ pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rmii"; phy-handle = <ðphy1>; + phy-supply = <®_eth_phy>; status = "okay"; mdio { -- 2.22.0