On Wed, Jul 31, 2019 at 10:42:51AM -0700, Andrey Smirnov wrote:
> Reprogramming bootloader on watchdog MCU will result in reported
> default timeout value of "0". That in turn will be unnecesarily
> rejected by the driver as invalid device (-ENODEV). Simplify probe to
> just read stored timeout value, clamp it to an acceptable range and
> program the value unconditionally to fix the above.
>
> Signed-off-by: Andrey Smirnov <andrew.smir...@gmail.com>
> Cc: Chris Healy <cphe...@gmail.com>
> Cc: Guenter Roeck <li...@roeck-us.net>
> Cc: Rick Ramstetter <r...@anteaterllc.com>
> Cc: linux-watch...@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
I have not heard back on the question I had about selecting the minimum
timeout and not a more reasonable default. Since the code itself
is technically correct, marking the patch as
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Guenter
> ---
> drivers/watchdog/ziirave_wdt.c | 22 +++++++++-------------
> 1 file changed, 9 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c
> index 89ce6982ba53..33c8d2eadada 100644
> --- a/drivers/watchdog/ziirave_wdt.c
> +++ b/drivers/watchdog/ziirave_wdt.c
> @@ -667,22 +667,18 @@ static int ziirave_wdt_probe(struct i2c_client *client,
> return val;
> }
>
> - if (val < ZIIRAVE_TIMEOUT_MIN)
> - return -ENODEV;
> -
> - w_priv->wdd.timeout = val;
> - } else {
> - ret = ziirave_wdt_set_timeout(&w_priv->wdd,
> - w_priv->wdd.timeout);
> - if (ret) {
> - dev_err(&client->dev, "Failed to set timeout\n");
> - return ret;
> - }
> + w_priv->wdd.timeout = clamp(val, ZIIRAVE_TIMEOUT_MIN,
> + ZIIRAVE_TIMEOUT_MAX);
> + }
>
> - dev_info(&client->dev, "Timeout set to %ds\n",
> - w_priv->wdd.timeout);
> + ret = ziirave_wdt_set_timeout(&w_priv->wdd, w_priv->wdd.timeout);
> + if (ret) {
> + dev_err(&client->dev, "Failed to set timeout\n");
> + return ret;
> }
>
> + dev_info(&client->dev, "Timeout set to %ds\n", w_priv->wdd.timeout);
> +
> watchdog_set_nowayout(&w_priv->wdd, nowayout);
>
> i2c_set_clientdata(client, w_priv);
> --
> 2.21.0
>
