On Mon, 2019-08-05 at 23:02 +0200, Heiner Kallweit wrote:
> [External]
>
> On 05.08.2019 18:54, Alexandru Ardelean wrote:
> > This change adds support for enabling PHY interrupts that can be used by
> > the PHY framework to get signal for link/speed/auto-negotiation changes.
> >
> > Signed-off-by: Alexandru Ardelean <alexandru.ardel...@analog.com>
> > ---
> > drivers/net/phy/adin.c | 44 ++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 44 insertions(+)
> >
> > diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
> > index c100a0dd95cd..b75c723bda79 100644
> > --- a/drivers/net/phy/adin.c
> > +++ b/drivers/net/phy/adin.c
> > @@ -14,6 +14,22 @@
> > #define PHY_ID_ADIN1200 0x0283bc20
> > #define PHY_ID_ADIN1300 0x0283bc30
> >
> > +#define ADIN1300_INT_MASK_REG 0x0018
> > +#define ADIN1300_INT_MDIO_SYNC_EN BIT(9)
> > +#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8)
> > +#define ADIN1300_INT_ANEG_PAGE_RX_EN BIT(6)
> > +#define ADIN1300_INT_IDLE_ERR_CNT_EN BIT(5)
> > +#define ADIN1300_INT_MAC_FIFO_OU_EN BIT(4)
> > +#define ADIN1300_INT_RX_STAT_CHNG_EN BIT(3)
> > +#define ADIN1300_INT_LINK_STAT_CHNG_EN BIT(2)
> > +#define ADIN1300_INT_SPEED_CHNG_EN BIT(1)
> > +#define ADIN1300_INT_HW_IRQ_EN BIT(0)
> > +#define ADIN1300_INT_MASK_EN \
> > + (ADIN1300_INT_ANEG_STAT_CHNG_EN | ADIN1300_INT_ANEG_PAGE_RX_EN | \
> > + ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_SPEED_CHNG_EN | \
> > + ADIN1300_INT_HW_IRQ_EN)
> > +#define ADIN1300_INT_STATUS_REG 0x0019
> > +
> > static int adin_config_init(struct phy_device *phydev)
> > {
> > int rc;
> > @@ -25,15 +41,40 @@ static int adin_config_init(struct phy_device *phydev)
> > return 0;
> > }
> >
> > +static int adin_phy_ack_intr(struct phy_device *phydev)
> > +{
> > + int ret;
> > +
> > + /* Clear pending interrupts. */
> > + ret = phy_read(phydev, ADIN1300_INT_STATUS_REG);
> > + if (ret < 0)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int adin_phy_config_intr(struct phy_device *phydev)
> > +{
> > + if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> > + return phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
> > + ADIN1300_INT_MASK_EN);
> > +
> > + return phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
> > + ADIN1300_INT_MASK_EN);
> > +}
> > +
> > static struct phy_driver adin_driver[] = {
> > {
> > .phy_id = PHY_ID_ADIN1200,
> > .name = "ADIN1200",
> > .phy_id_mask = 0xfffffff0,
> > .features = PHY_BASIC_FEATURES,
> > + .flags = PHY_HAS_INTERRUPT,
>
> This flag doesn't exist any longer. This indicates that you
> develop against an older kernel version. Please develop
> against net-next. Check up-to-date drivers like the one
> for Realtek PHY's for hints.
ack;
>
> > .config_init = adin_config_init,
> > .config_aneg = genphy_config_aneg,
> > .read_status = genphy_read_status,
> > + .ack_interrupt = adin_phy_ack_intr,
> > + .config_intr = adin_phy_config_intr,
> > .resume = genphy_resume,
> > .suspend = genphy_suspend,
> > },
> > @@ -42,9 +83,12 @@ static struct phy_driver adin_driver[] = {
> > .name = "ADIN1300",
> > .phy_id_mask = 0xfffffff0,
> > .features = PHY_GBIT_FEATURES,
> > + .flags = PHY_HAS_INTERRUPT,
> > .config_init = adin_config_init,
> > .config_aneg = genphy_config_aneg,
> > .read_status = genphy_read_status,
> > + .ack_interrupt = adin_phy_ack_intr,
> > + .config_intr = adin_phy_config_intr,
> > .resume = genphy_resume,
> > .suspend = genphy_suspend,
> > },
> >
