[PATCH] ARM64: dts: allwinner: Add devicetree for pine H64 modelA evaluation board

[Corentin Labbe]

This patch adds the evaluation variant of the model A of the PineH64.
The model A has the same size of the pine64 and has a PCIE slot.

The only devicetree difference with current pineH64, is the PHY
regulator.

Signed-off-by: Corentin Labbe <clabbe.montj...@gmail.com>
---
 arch/arm64/boot/dts/allwinner/Makefile        |  1 +
 .../sun50i-h6-pine-h64-modelA-eval.dts        | 26 +++++++++++++++++++
 2 files changed, 27 insertions(+)
 create mode 100644 
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile 
b/arch/arm64/boot/dts/allwinner/Makefile
index f6db0611cb85..9a02166cbf72 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -25,3 +25,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-modelA-eval.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts 
b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
new file mode 100644
index 000000000000..d8ff02747efe
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-modelA-eval.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2019 Corentin Labbe <clabbe.montj...@gmail.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+       model = "Pine H64 model A evaluation board";
+       compatible = "pine64,pine-h64-modelA-eval", "allwinner,sun50i-h6";
+
+       reg_gmac_3v3: gmac-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc-gmac-3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               startup-delay-us = <100000>;
+               gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+};
+
+&emac {
+       phy-supply = <&reg_gmac_3v3>;
+};
-- 
2.21.0