From: Josef Friedl <[email protected]> add mt6323-rtc and mt6323-pwrc to mt6397 mfd DT bindings an example is shown in mt6323-poweroff.txt
Suggested-by: Frank Wunderlich <[email protected]> Signed-off-by: Josef Friedl <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]> Acked-for-MFD-by: Lee Jones <[email protected]> --- changes since v4: use relative path changes since v3: none changes since v2: separated rtc-mt6397.txt to part 2 --- .../devicetree/bindings/mfd/mt6397.txt | 20 +++++++++++++------ .../bindings/power/reset/mt6323-poweroff.txt | 20 +++++++++++++++++++ 2 files changed, 34 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index 0ebd08af777d..063f5fe1cace 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -8,11 +8,12 @@ MT6397/MT6323 is a multifunction device with the following sub modules: - Clock - LED - Keys +- Power controller It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +../../bindings/soc/mediatek/pwrap.txt This document describes the binding for MFD device and its sub module. @@ -22,14 +23,16 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323" Optional subnodes: - rtc - Required properties: + Required properties: Should be one of follows + - compatible: "mediatek,mt6323-rtc" - compatible: "mediatek,mt6397-rtc" + For details, see ../../bindings/rtc/rtc-mt6397.txt - regulators Required properties: - compatible: "mediatek,mt6397-regulator" - see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt + see ../../bindings/regulator/mt6397-regulator.txt - compatible: "mediatek,mt6323-regulator" - see Documentation/devicetree/bindings/regulator/mt6323-regulator.txt + see ../../bindings/regulator/mt6323-regulator.txt - codec Required properties: - compatible: "mediatek,mt6397-codec" @@ -39,12 +42,17 @@ Optional subnodes: - led Required properties: - compatible: "mediatek,mt6323-led" - see Documentation/devicetree/bindings/leds/leds-mt6323.txt + see ../../bindings/leds/leds-mt6323.txt - keys Required properties: - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" - see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt + see ../../bindings/input/mtk-pmic-keys.txt + +- power-controller + Required properties: + - compatible: "mediatek,mt6323-pwrc" + For details, see ../../bindings/power/reset/mt6323-poweroff.txt Example: pwrap: pwrap@1000f000 { diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt new file mode 100644 index 000000000000..933f0c48e887 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt @@ -0,0 +1,20 @@ +Device Tree Bindings for Power Controller on MediaTek PMIC + +The power controller which could be found on PMIC is responsible for externally +powering off or on the remote MediaTek SoC through the circuit BBPU. + +Required properties: +- compatible: Should be one of follows + "mediatek,mt6323-pwrc": for MT6323 PMIC + +Example: + + pmic { + compatible = "mediatek,mt6323"; + + ... + + power-controller { + compatible = "mediatek,mt6323-pwrc"; + }; + } -- 2.17.1
