On 28/08/19 2:14 PM, Masahiro Yamada wrote:
> Currently, the DMA addresses are casted to (u64) for the upper 32bits
> to avoid "right shift count >= width of type" warning.
>
> <linux/kernel.h> provides macros to address this, and the macro names
> are self-documenting.
>
> Signed-off-by: Masahiro Yamada <[email protected]>
> ---
>
> drivers/mmc/host/sdhci.c | 14 ++++++++------
> 1 file changed, 8 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index a5dc5aae973e..07144a195a9f 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -668,10 +668,10 @@ void sdhci_adma_write_desc(struct sdhci_host *host,
> void **desc,
> /* 32-bit and 64-bit descriptors have these members in same position */
> dma_desc->cmd = cpu_to_le16(cmd);
> dma_desc->len = cpu_to_le16(len);
> - dma_desc->addr_lo = cpu_to_le32((u32)addr);
> + dma_desc->addr_lo = cpu_to_le32(lower_32_bits(addr));
>
> if (host->flags & SDHCI_USE_64_BIT_DMA)
> - dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
> + dma_desc->addr_hi = cpu_to_le32(upper_32_bits(addr));
>
> *desc += host->desc_sz;
> }
> @@ -827,9 +827,10 @@ static dma_addr_t sdhci_sdma_address(struct sdhci_host
> *host)
> static void sdhci_set_sdma_addr(struct sdhci_host *host, dma_addr_t addr)
> {
> if (host->v4_mode) {
To reduce line wrapping, how about using:
u32 lo = lower_32_bits(addr);
u32 hi = upper_32_bits(addr);
> - sdhci_writel(host, addr, SDHCI_ADMA_ADDRESS);
> + sdhci_writel(host, lower_32_bits(addr), SDHCI_ADMA_ADDRESS);
> if (host->flags & SDHCI_USE_64_BIT_DMA)
> - sdhci_writel(host, (u64)addr >> 32,
> SDHCI_ADMA_ADDRESS_HI);
> + sdhci_writel(host, upper_32_bits(addr),
> + SDHCI_ADMA_ADDRESS_HI);
> } else {
> sdhci_writel(host, addr, SDHCI_DMA_ADDRESS);
> }
> @@ -1096,10 +1097,11 @@ static void sdhci_prepare_data(struct sdhci_host
> *host, struct mmc_command *cmd)
> } else if (host->flags & SDHCI_USE_ADMA) {
To reduce line wrapping, how about using:
u32 lo = lower_32_bits(host->adma_addr);
u32 hi = upper_32_bits(host->adma_addr);
> sdhci_adma_table_pre(host, data, sg_cnt);
>
> - sdhci_writel(host, host->adma_addr, SDHCI_ADMA_ADDRESS);
> + sdhci_writel(host, lower_32_bits(host->adma_addr),
> + SDHCI_ADMA_ADDRESS);
> if (host->flags & SDHCI_USE_64_BIT_DMA)
> sdhci_writel(host,
> - (u64)host->adma_addr >> 32,
> + upper_32_bits(host->adma_addr),
> SDHCI_ADMA_ADDRESS_HI);
> } else {
> WARN_ON(sg_cnt != 1);
>
