Hi,
On Fri, Aug 30, 2019 at 12:51 PM Stephen Boyd <[email protected]> wrote:
>
> Some MMC cards fail to enumerate properly when inserted into an MMC slot
> on sdm845 devices. This is because the clk ops for qcom clks round the
> frequency up to the nearest rate instead of down to the nearest rate.
> For example, the MMC driver requests a frequency of 52MHz from
> clk_set_rate() but the qcom implementation for these clks rounds 52MHz
> up to the next supported frequency of 100MHz. The MMC driver could be
> modified to request clk rate ranges but for now we can fix this in the
> clk driver by changing the rounding policy for this clk to be round down
> instead of round up.
Since all the MMC rates are expressed as "maximum" clock rates doing
it like you are doing it now seems sane.
> Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for
> SDM845")
> Reported-by: Douglas Anderson <[email protected]>
> Cc: Taniya Das <[email protected]>
> Signed-off-by: Stephen Boyd <[email protected]>
> ---
>
> I suppose we need to do this for all the sdc clks in qcom driver?
Seems like a good idea to me.
> drivers/clk/qcom/gcc-sdm845.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Reviewed-by: Douglas Anderson <[email protected]>
-Doug
