On Thursday 20 September 2007 18:37:27 Len Brown wrote:
> On Thursday 20 September 2007 12:13, Maxim Levitsky wrote:
> > Hi,
> >
> > I had always a issue with wake-up devices after suspend-to disk.
> >
> > Scenario 1:
> > 1) enable all devices devices: (echo "....." > /proc/acpi/wakeup), I have a
> > script that does that
> > 2) suspend to ram
> > 3) hit a key on keyboard / mouse / send WOL magc packet, and system resumes
> > in all cases
> > 4) repeat the above, and all the same, good.
> >
> > Scenario 2:
> > 1) enable all devices devices: (echo "....." > /proc/acpi/wakeup)
> > 2) suspend to disk
> > 3) send WOL, doesn't wake the system, but should, and usb can't wake since
> > it is powered off
> > 4) power system on, let system resume from disk, works
> > 5) suspend to ram
> > 6) hit a key on keyboard / mouse / send WOL magic packet, nothing works.
> >
> > I never got to the bottom of that issue, and just gave up, but not long ago,
> > and I sadly don't remember exactly when / what .config I had, it begin to
> > work
> > I decided that this bug is fixed, and since I suspend to disk rarely, I
> > assumed it works
> > But now, I discovered that this bug is back, and I don't know what to do
> > I tried 2.6.22, 2.6.21-rc7, 2.6.23-rc1, and all fail in same way.
>
> Yes, please try this one:
>
> commit ea256a37b093b9c0c0fa639eb9a0bff10df41998
> Author: Alexey Starikovskiy <[EMAIL PROTECTED]>
> Date: Wed Sep 12 14:04:32 2007 +0400
>
> ACPI: Hibernate erroneously disabled Suspend wakeup devices
>
> S4 suspend to disk will disable GPE's permanently
> because acpi_gpe_sleep_prepare() does not have
> a counterpart at resume time. Thus, those devices
> became unavailable for wakeup from subsequent
> S3 suspend-to-ram.
>
> Here acpi_gpe_sleep_prepare() is removed, and upon suspend
> acpi_enable_wakeup_device() gets its functionality.
> Upon resume, acpi_disable_wakeup_device() restores the state.
>
> https://bugzilla.novell.com/show_bug.cgi?id=292300
>
> Signed-off-by: Alexey Starikovskiy <[EMAIL PROTECTED]>
> Acked-by: Pavel Machek <[EMAIL PROTECTED]>
> Signed-off-by: Len Brown <[EMAIL PROTECTED]>
>
> diff --git a/drivers/acpi/sleep/poweroff.c b/drivers/acpi/sleep/poweroff.c
> index 39e40d5..2725a60 100644
> --- a/drivers/acpi/sleep/poweroff.c
> +++ b/drivers/acpi/sleep/poweroff.c
> @@ -32,7 +32,6 @@ int acpi_sleep_prepare(u32 acpi_state)
> ACPI_FLUSH_CPU_CACHE();
> acpi_enable_wakeup_device_prep(acpi_state);
> #endif
> - acpi_gpe_sleep_prepare(acpi_state);
> acpi_enter_sleep_state_prep(acpi_state);
> return 0;
> }
> diff --git a/drivers/acpi/sleep/sleep.h b/drivers/acpi/sleep/sleep.h
> index ff1f850..a2ea125 100644
> --- a/drivers/acpi/sleep/sleep.h
> +++ b/drivers/acpi/sleep/sleep.h
> @@ -5,6 +5,5 @@ extern int acpi_suspend (u32 state);
> extern void acpi_enable_wakeup_device_prep(u8 sleep_state);
> extern void acpi_enable_wakeup_device(u8 sleep_state);
> extern void acpi_disable_wakeup_device(u8 sleep_state);
> -extern void acpi_gpe_sleep_prepare(u32 sleep_state);
>
> extern int acpi_sleep_prepare(u32 acpi_state);
> diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c
> index 97c27dd..ed8e41b 100644
> --- a/drivers/acpi/sleep/wakeup.c
> +++ b/drivers/acpi/sleep/wakeup.c
> @@ -64,36 +64,29 @@ void acpi_enable_wakeup_device(u8 sleep_state)
> ACPI_FUNCTION_TRACE("acpi_enable_wakeup_device");
> spin_lock(&acpi_device_lock);
> list_for_each_safe(node, next, &acpi_wakeup_device_list) {
> - struct acpi_device *dev = container_of(node,
> - struct acpi_device,
> - wakeup_list);
> -
> + struct acpi_device *dev =
> + container_of(node, struct acpi_device, wakeup_list);
> + if (!dev->wakeup.flags.valid)
> + continue;
> /* If users want to disable run-wake GPE,
> * we only disable it for wake and leave it for runtime
> */
> - if (dev->wakeup.flags.run_wake && !dev->wakeup.state.enabled) {
> - spin_unlock(&acpi_device_lock);
> - acpi_set_gpe_type(dev->wakeup.gpe_device,
> - dev->wakeup.gpe_number,
> - ACPI_GPE_TYPE_RUNTIME);
> - /* Re-enable it, since set_gpe_type will disable it */
> - acpi_enable_gpe(dev->wakeup.gpe_device,
> - dev->wakeup.gpe_number, ACPI_ISR);
> - spin_lock(&acpi_device_lock);
> + if (!dev->wakeup.state.enabled ||
> + sleep_state > (u32) dev->wakeup.sleep_state) {
> + if (dev->wakeup.flags.run_wake) {
> + spin_unlock(&acpi_device_lock);
> + /* set_gpe_type will disable GPE, leave it like
> that */
> + acpi_set_gpe_type(dev->wakeup.gpe_device,
> + dev->wakeup.gpe_number,
> + ACPI_GPE_TYPE_RUNTIME);
> + spin_lock(&acpi_device_lock);
> + }
> continue;
> }
> -
> - if (!dev->wakeup.flags.valid ||
> - !dev->wakeup.state.enabled ||
> - (sleep_state > (u32) dev->wakeup.sleep_state))
> - continue;
> -
> spin_unlock(&acpi_device_lock);
> - /* run-wake GPE has been enabled */
> if (!dev->wakeup.flags.run_wake)
> acpi_enable_gpe(dev->wakeup.gpe_device,
> dev->wakeup.gpe_number, ACPI_ISR);
> - dev->wakeup.state.active = 1;
> spin_lock(&acpi_device_lock);
> }
> spin_unlock(&acpi_device_lock);
> @@ -112,26 +105,25 @@ void acpi_disable_wakeup_device(u8 sleep_state)
>
> spin_lock(&acpi_device_lock);
> list_for_each_safe(node, next, &acpi_wakeup_device_list) {
> - struct acpi_device *dev = container_of(node,
> - struct acpi_device,
> - wakeup_list);
> + struct acpi_device *dev =
> + container_of(node, struct acpi_device, wakeup_list);
>
> - if (dev->wakeup.flags.run_wake && !dev->wakeup.state.enabled) {
> - spin_unlock(&acpi_device_lock);
> - acpi_set_gpe_type(dev->wakeup.gpe_device,
> - dev->wakeup.gpe_number,
> - ACPI_GPE_TYPE_WAKE_RUN);
> - /* Re-enable it, since set_gpe_type will disable it */
> - acpi_enable_gpe(dev->wakeup.gpe_device,
> - dev->wakeup.gpe_number, ACPI_NOT_ISR);
> - spin_lock(&acpi_device_lock);
> + if (!dev->wakeup.flags.valid)
> continue;
> - }
> -
> - if (!dev->wakeup.flags.valid ||
> - !dev->wakeup.state.active ||
> - (sleep_state > (u32) dev->wakeup.sleep_state))
> + if (!dev->wakeup.state.enabled ||
> + sleep_state > (u32) dev->wakeup.sleep_state) {
> + if (dev->wakeup.flags.run_wake) {
> + spin_unlock(&acpi_device_lock);
> + acpi_set_gpe_type(dev->wakeup.gpe_device,
> + dev->wakeup.gpe_number,
> + ACPI_GPE_TYPE_WAKE_RUN);
> + /* Re-enable it, since set_gpe_type will
> disable it */
> + acpi_enable_gpe(dev->wakeup.gpe_device,
> + dev->wakeup.gpe_number,
> ACPI_NOT_ISR);
> + spin_lock(&acpi_device_lock);
> + }
> continue;
> + }
>
> spin_unlock(&acpi_device_lock);
> acpi_disable_wakeup_device_power(dev);
> @@ -142,7 +134,6 @@ void acpi_disable_wakeup_device(u8 sleep_state)
> acpi_clear_gpe(dev->wakeup.gpe_device,
> dev->wakeup.gpe_number, ACPI_NOT_ISR);
> }
> - dev->wakeup.state.active = 0;
> spin_lock(&acpi_device_lock);
> }
> spin_unlock(&acpi_device_lock);
> @@ -160,48 +151,20 @@ static int __init acpi_wakeup_device_init(void)
> struct acpi_device *dev = container_of(node,
> struct acpi_device,
> wakeup_list);
> -
> /* In case user doesn't load button driver */
> - if (dev->wakeup.flags.run_wake && !dev->wakeup.state.enabled) {
> - spin_unlock(&acpi_device_lock);
> - acpi_set_gpe_type(dev->wakeup.gpe_device,
> - dev->wakeup.gpe_number,
> - ACPI_GPE_TYPE_WAKE_RUN);
> - acpi_enable_gpe(dev->wakeup.gpe_device,
> - dev->wakeup.gpe_number, ACPI_NOT_ISR);
> - dev->wakeup.state.enabled = 1;
> - spin_lock(&acpi_device_lock);
> - }
> + if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled)
> + continue;
> + spin_unlock(&acpi_device_lock);
> + acpi_set_gpe_type(dev->wakeup.gpe_device,
> + dev->wakeup.gpe_number,
> + ACPI_GPE_TYPE_WAKE_RUN);
> + acpi_enable_gpe(dev->wakeup.gpe_device,
> + dev->wakeup.gpe_number, ACPI_NOT_ISR);
> + dev->wakeup.state.enabled = 1;
> + spin_lock(&acpi_device_lock);
> }
> spin_unlock(&acpi_device_lock);
> -
> return 0;
> }
>
> late_initcall(acpi_wakeup_device_init);
> -
> -/*
> - * Disable all wakeup GPEs before entering requested sleep state.
> - * @sleep_state: ACPI state
> - * Since acpi_enter_sleep_state() will disable all
> - * RUNTIME GPEs, we simply mark all GPES that
> - * are not enabled for wakeup from requested state as RUNTIME.
> - */
> -void acpi_gpe_sleep_prepare(u32 sleep_state)
> -{
> - struct list_head *node, *next;
> -
> - list_for_each_safe(node, next, &acpi_wakeup_device_list) {
> - struct acpi_device *dev = container_of(node,
> - struct acpi_device,
> - wakeup_list);
> -
> - /* The GPE can wakeup system from this state, don't touch it */
> - if ((u32) dev->wakeup.sleep_state >= sleep_state)
> - continue;
> - /* acpi_set_gpe_type will automatically disable GPE */
> - acpi_set_gpe_type(dev->wakeup.gpe_device,
> - dev->wakeup.gpe_number,
> - ACPI_GPE_TYPE_RUNTIME);
> - }
> -}
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index 86aea44..17500a1 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -264,7 +264,6 @@ struct acpi_device_wakeup_flags {
>
> struct acpi_device_wakeup_state {
> u8 enabled:1;
> - u8 active:1;
> };
>
> struct acpi_device_wakeup {
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Hi,
Well, what can I say....
Big big thanks, works perfectly.
All resume device work after suspend to disk, and I was able to WOL the system
while it is suspended to disk.
Big thanks,
Best regards,
Maxim Levitsky
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
