The first generation i.MX6 processors does not send an interrupt when the
power key is pressed. It sends a power down request interrupt if the key is
released before a hard shutdown (5 second press). This should allow
software to bring down the SoC safely.
For this driver to work as a regular power key with the older SoCs, we need
to send a keypress AND release when we get the power down request irq.
Signed-off-by: Robin van der Gracht <ro...@protonic.nl>
---
Changes v2 -> v3:
- Drop alt compatible string for identifying first revision snvs hardware,
read minor revision from register instead.
- Drop imx6qdl.dtsi modification and device-tree binding documentation.
- Add an additional input_sync() to create 2 seperate input reports for press
and release.
drivers/input/keyboard/Kconfig | 2 +-
drivers/input/keyboard/snvs_pwrkey.c | 28 ++++++++++++++++++++++++++--
2 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 7c4f19dab34f..937e58da5ce1 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -436,7 +436,7 @@ config KEYBOARD_SNVS_PWRKEY
depends on OF
help
This is the snvs powerkey driver for the Freescale i.MX application
- processors that are newer than i.MX6 SX.
+ processors.
To compile this driver as a module, choose M here; the
module will be called snvs_pwrkey.
diff --git a/drivers/input/keyboard/snvs_pwrkey.c
b/drivers/input/keyboard/snvs_pwrkey.c
index 5342d8d45f81..828580eee0d2 100644
--- a/drivers/input/keyboard/snvs_pwrkey.c
+++ b/drivers/input/keyboard/snvs_pwrkey.c
@@ -19,6 +19,7 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#define SNVS_HPVIDR1_REG 0xF8
#define SNVS_LPSR_REG 0x4C /* LP Status Register */
#define SNVS_LPCR_REG 0x38 /* LP Control Register */
#define SNVS_HPSR_REG 0x14
@@ -37,6 +38,7 @@ struct pwrkey_drv_data {
int wakeup;
struct timer_list check_timer;
struct input_dev *input;
+ u8 minor_rev;
};
static void imx_imx_snvs_check_for_events(struct timer_list *t)
@@ -45,6 +47,20 @@ static void imx_imx_snvs_check_for_events(struct timer_list
*t)
struct input_dev *input = pdata->input;
u32 state;
+ if (pdata->minor_rev == 0) {
+ /*
+ * The first generation i.MX6 SoCs only sends an interrupt on
+ * button release. To mimic power-key usage, we'll prepend a
+ * press event.
+ */
+ input_report_key(input, pdata->keycode, 1);
+ input_sync(input);
+ input_report_key(input, pdata->keycode, 0);
+ input_sync(input);
+ pm_relax(input->dev.parent);
+ return;
+ }
+
regmap_read(pdata->snvs, SNVS_HPSR_REG, &state);
state = state & SNVS_HPSR_BTN ? 1 : 0;
@@ -67,13 +83,17 @@ static irqreturn_t imx_snvs_pwrkey_interrupt(int irq, void
*dev_id)
{
struct platform_device *pdev = dev_id;
struct pwrkey_drv_data *pdata = platform_get_drvdata(pdev);
+ unsigned long expire = jiffies;
u32 lp_status;
pm_wakeup_event(pdata->input->dev.parent, 0);
regmap_read(pdata->snvs, SNVS_LPSR_REG, &lp_status);
- if (lp_status & SNVS_LPSR_SPO)
- mod_timer(&pdata->check_timer, jiffies +
msecs_to_jiffies(DEBOUNCE_TIME));
+ if (lp_status & SNVS_LPSR_SPO) {
+ if (pdata->minor_rev > 0)
+ expire = jiffies + msecs_to_jiffies(DEBOUNCE_TIME);
+ mod_timer(&pdata->check_timer, expire);
+ }
/* clear SPO status */
regmap_write(pdata->snvs, SNVS_LPSR_REG, SNVS_LPSR_SPO);
@@ -94,6 +114,7 @@ static int imx_snvs_pwrkey_probe(struct platform_device
*pdev)
struct input_dev *input = NULL;
struct device_node *np;
int error;
+ u32 vid;
/* Get SNVS register Page */
np = pdev->dev.of_node;
@@ -123,6 +144,9 @@ static int imx_snvs_pwrkey_probe(struct platform_device
*pdev)
return -EINVAL;
}
+ regmap_read(pdata->snvs, SNVS_HPVIDR1_REG, &vid);
+ pdata->minor_rev = vid & 0xff;
+
regmap_update_bits(pdata->snvs, SNVS_LPCR_REG, SNVS_LPCR_DEP_EN,
SNVS_LPCR_DEP_EN);
/* clear the unexpected interrupt before driver ready */
--
2.20.1
