The rtc is on i2c2 bus(hardware), not on i2c1 channel 3,
so correct it
Signed-off-by: Biwen Li <biwen...@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index de6ef39f3118..6c0540ad9c59 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -133,11 +133,6 @@
vcc-supply = <&sb_3v3>;
};
- rtc@51 {
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@@ -166,6 +161,14 @@
};
};
+&i2c1 {
+ status = "okay";
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
&sai1 {
status = "okay";
};
--
2.17.1
