Fixes from Alan, PCI IDs from ATI/AMD.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 10 ++++++----
drivers/ata/libata-core.c | 4 ++++
drivers/ata/libata-sff.c | 5 ++++-
3 files changed, 14 insertions(+), 5 deletions(-)
Alan Cox (2):
libata: Update the blacklist with a few more devices
libata-sff: Fix documentation
henry su (1):
[libata] ahci: add ATI SB800 PCI IDs
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 06f212f..c168203 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -418,10 +418,12 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
- { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 IDE */
- { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700 AHCI */
- { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700 nraid5 */
- { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700 raid5 */
+ { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */
+ { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c43de9a..772be09 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3778,6 +3778,9 @@ static const struct ata_blacklist_entry
ata_device_blacklist [] = {
{ "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
{ "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ },
{ "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ },
+ { "Maxtor 7B250S0", "BANC1B70", ATA_HORKAGE_NONCQ, },
+ { "Maxtor 7B300S0", "BANC1B70", ATA_HORKAGE_NONCQ },
+ { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
{ "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
ATA_HORKAGE_NONCQ },
/* NCQ hard hangs device under heavier load, needs hard power cycle */
@@ -3794,6 +3797,7 @@ static const struct ata_blacklist_entry
ata_device_blacklist [] = {
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
{ "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },
{ "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, },
+ { "ST3160812AS", "3.AD", ATA_HORKAGE_NONCQ, },
{ "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, },
/* devices which puke on READ_NATIVE_MAX */
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 1cce219..8023167 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -297,7 +297,7 @@ void ata_bmdma_start (struct ata_queued_cmd *qc)
dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- /* Strictly, one may wish to issue a readb() here, to
+ /* Strictly, one may wish to issue an ioread8() here, to
* flush the mmio write. However, control also passes
* to the hardware at this point, and it will interrupt
* us when we are to resume control. So, in effect,
@@ -307,6 +307,9 @@ void ata_bmdma_start (struct ata_queued_cmd *qc)
* is expected, so I think it is best to not add a readb()
* without first all the MMIO ATA cards/mobos.
* Or maybe I'm just being paranoid.
+ *
+ * FIXME: The posting of this write means I/O starts are
+ * unneccessarily delayed for MMIO
*/
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
