On 06-09-2019 07:13, Chunfeng Yun wrote:
> On Thu, 2019-09-05 at 09:57 +0530, Nagarjuna Kristam wrote:
>>
>> On 04-09-2019 16:00, Chunfeng Yun wrote:
>>> On Wed, 2019-09-04 at 13:53 +0530, Nagarjuna Kristam wrote:
>>>> This patch adds UDC driver for tegra XUSB 3.0 device mode controller.
>>>> XUSB device mode controller supports SS, HS and FS modes
>>>>
>>>> Based on work by:
>>>> Mark Kuo <[email protected]>
>>>> Hui Fu <[email protected]>
>>>> Andrew Bresticker <[email protected]>
>>>>
>>>> Signed-off-by: Nagarjuna Kristam <[email protected]>
>>>> Acked-by: Thierry Reding <[email protected]>
>>>> ---
>>>> drivers/usb/gadget/udc/Kconfig | 12 +
>>>> drivers/usb/gadget/udc/Makefile | 1 +
>>>> drivers/usb/gadget/udc/tegra-xudc.c | 3791
>>>> +++++++++++++++++++++++++++++++++++
>>>> 3 files changed, 3804 insertions(+)
>>>> create mode 100644 drivers/usb/gadget/udc/tegra-xudc.c
>>>>
>>>> diff --git a/drivers/usb/gadget/udc/Kconfig
>>>> b/drivers/usb/gadget/udc/Kconfig
>>>> index d354036..0fe7577 100644
>>>> --- a/drivers/usb/gadget/udc/Kconfig
>>>> +++ b/drivers/usb/gadget/udc/Kconfig
>>>> @@ -441,6 +441,18 @@ config USB_GADGET_XILINX
>>>> dynamically linked module called "udc-xilinx" and force all
>>>> gadget drivers to also be dynamically linked.
>>>>
>>>> +config USB_TEGRA_XUDC
>>>> + tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller"
>>>> + depends on ARCH_TEGRA || COMPILE_TEST
>>>> + depends on PHY_TEGRA_XUSB
>>>> + select USB_CONN_GPIO
>>> To me, needn't select this driver, without it, the driver still build
>>> pass
>>>
>> Yes compilation passes with out this. Added select for getting USB_CONN_GPIO
>> driver functionality.
> We can enable it in defconfig, think about one day use type-c to do
> dual-role switch, or other ways, will needn't select it then.
>
Thanks for details, will get it enabled via defconfig instead.
- Nagarjuna
>>
>>>> + help
>>>> + Enables NVIDIA Tegra USB 3.0 device mode controller driver.
>>>> +
>>>> + Say "y" to link the driver statically, or "m" to build a
>>>> + dynamically linked module called "tegra_xudc" and force all
>>>> + gadget drivers to also be dynamically linked.
>>>> +
>>>> source "drivers/usb/gadget/udc/aspeed-vhub/Kconfig"
>>>>
>
>
