On Tue, Sep 10, 2019 at 05:55:02PM +0530, Pankaj Dubey wrote: > From: Anvesh Salveru <anves...@samsung.com> > > In some platforms, PCIe PHY may have issues which will prevent linkup > to happen in GEN3 or high speed. In case equalization fails, link will > fallback to GEN1. > > Designware controller gives flexibility to disable GEN3 equalization > completely or only phase 2 and 3.
Do some platforms have issues conducting phase 2 and 3 when they successfully conduct phase 0 and 1? > > Platform drivers can disable equalization phase 2 and 3, by setting > dwc_pci_quirk flag DWC_EQUALIZATION_DISABLE. > > Signed-off-by: Anvesh Salveru <anves...@samsung.com> > Signed-off-by: Pankaj Dubey <pankaj.du...@samsung.com> > --- > drivers/pci/controller/dwc/pcie-designware.c | 3 +++ > drivers/pci/controller/dwc/pcie-designware.h | 2 ++ > 2 files changed, 5 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c > b/drivers/pci/controller/dwc/pcie-designware.c > index bf82091..97a8268 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.c > +++ b/drivers/pci/controller/dwc/pcie-designware.c > @@ -472,5 +472,8 @@ void dw_pcie_setup(struct dw_pcie *pci) > if (pci->dwc_pci_quirk & DWC_EQUALIZATION_DISABLE) > val |= PORT_LOGIC_GEN3_EQ_DISABLE; > > + if (pci->dwc_pci_quirk & DWC_EQ_PHASE_2_3_DISABLE) > + val |= PORT_LOGIC_GEN3_EQ_PHASE_2_3_DISABLE; > + > dw_pcie_writel_dbi(pci, PCIE_PORT_GEN3_RELATED, val); > } > diff --git a/drivers/pci/controller/dwc/pcie-designware.h > b/drivers/pci/controller/dwc/pcie-designware.h > index a1453c5..b541508 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.h > +++ b/drivers/pci/controller/dwc/pcie-designware.h > @@ -31,6 +31,7 @@ > > /* Parameters for PCIe Quirks */ > #define DWC_EQUALIZATION_DISABLE 0x1 > +#define DWC_EQ_PHASE_2_3_DISABLE 0x2 It only makes sense for either DWC_EQUALIZATION_DISABLE or DWC_EQ_PHASE_2_3_DISABLE to be specified, though if dwc_pci_quirk intends to hold other quirks should these be numbers and not bit fields? Thanks, Andrew Murray > > /* Synopsys-specific PCIe configuration registers */ > #define PCIE_PORT_LINK_CONTROL 0x710 > @@ -65,6 +66,7 @@ > > #define PCIE_PORT_GEN3_RELATED 0x890 > #define PORT_LOGIC_GEN3_EQ_DISABLE BIT(16) > +#define PORT_LOGIC_GEN3_EQ_PHASE_2_3_DISABLE BIT(9) > > #define PCIE_ATU_VIEWPORT 0x900 > #define PCIE_ATU_REGION_INBOUND BIT(31) > -- > 2.7.4 >
