Add powerdown-gpios to the list of optional properties for the OV2659 camera sensor.
Signed-off-by: Benoit Parrot <[email protected]> --- Documentation/devicetree/bindings/media/i2c/ov2659.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/media/i2c/ov2659.txt b/Documentation/devicetree/bindings/media/i2c/ov2659.txt index cabc7d827dfb..f55204cce0cd 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov2659.txt +++ b/Documentation/devicetree/bindings/media/i2c/ov2659.txt @@ -12,6 +12,10 @@ Required Properties: - clock-names: should be "xvclk". - link-frequencies: target pixel clock frequency. +Optional Properties: +- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any. + Active is low. + For further reading on port node refer to Documentation/devicetree/bindings/media/video-interfaces.txt. @@ -27,6 +31,8 @@ Example: clocks = <&clk_ov2659 0>; clock-names = "xvclk"; + powerdown-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + port { ov2659_0: endpoint { remote-endpoint = <&vpfe_ep>; -- 2.17.1
